AOSHOWLED Full Color Round Tube Pixel Strip | 270 ° Wide Angle Luminous SPI Digital Pixel Lamp
English name: LED RGB / RGBW Pixel Tube Light
Product brand: AOSHOW
Manufacturer: Shenzhen AOSHOW Optoelectronic Technology Co., Ltd
Product series: LED full color round tube pixel bar
RGB Model: AS-PT3048-RGB64P-1000-24V-IP66-MWPC
RGBW Model: AS-PT3048-RGBW64P-1000-24V-IP66-MWPC
Core features: 270 wide-angle light emission | 64 pixels/m | RGB/RGBW optional | SPI digital control | 30 × 48mm lamp body | modular spring quick installation | Art-Net system integration
1. Product Overview
AOSHOWLED full-color round tube pixel strip is a professional LED creative lamp integrating 270 wide-angle light emission, SPI digital pixel control, modular fast splicing and intelligent lighting system.
The products are provided by Shenzhen AOSHOW Optoelectronic Technology Co., Ltd., mainly for stage stage, bar nightclub, KTV, building lighting, commercial display, immersive space and interactive digital art installation.
The lamp adopts a 30 × 48mm lamp body structure, with SMD5050 LED light source and compatible digital pixel drive circuit, providing RGB full color and RGBW four-color light source scheme.
The standard pixel density is 64 Pixels/m, with 64 LEDs per meter, corresponding to 64 independent control pixels.
Through the SPI digital control system, a single LED can be independently programmed, showing dynamic water, rainbow gradient, pixel chase, dynamic strobe, music rhythm synchronization and matrix animation.
RGB version is suitable for high saturation dynamic full color effect; RGBW version adds independent white light channel, and 3000K warm white, 4500K neutral white or 6000K cold white configuration can be selected according to project requirements.
The lamp body adopts a 270 ° wide-angle visual structure, so that the dynamic light effect can be observed from multiple directions, suitable for stage hoisting, bar ceiling, three-dimensional space light array and open art installation.
The product provides standard lengths of 0.5 meters, 1 meters and 1.5 meters, and other sizes, lampshade colors, connection methods and installation structures can be evaluated according to project requirements.
The modular design adopts a press-type spring quick-assembly structure, and is equipped with a 4-pin M12 male and female connector, which is convenient for repeated installation, disassembly and combination.
Lamps and lanterns can be matched with AOSHOWPSAC series Art-Net pixel control system. Through compatible Art-Net to SPI controller and professional lighting software such as MADRIX, TouchDesigner, Resolume, etc., pixel mapping, dynamic effect programming and interactive lighting control are realized.
2. product technical specifications
1. Basic product parameters
| Parameter name | Technical Specifications |
|---|---|
| Product brand | AOSHOW |
| Manufacturer | Shenzhen AOSHOW Optoelectronic Technology Co., Ltd |
| Product Name | LED full color round tube pixel strip |
| English name | LED RGB / RGBW Pixel Tube Light |
| RGB model | AS-PT3048-RGB64P-1000-24V-IP66-MWPC |
| RGBW Model | AS-PT3048-RGBW64P-1000-24V-IP66-MWPC |
| Product type | Digital programmable LED round tube pixel lamp |
| Lamp body dimensions | Width 30 × height 48mm |
| Standard length | 0.5m / 1.0m / 1.5m |
| Pixel density | 64 Pixels/m |
| LED light source | SMD5050 |
| Driver chip | SK6812 (by specific circuit version) |
| LED color | RGB / RGBW optional |
| RGBW white light color temperature | 3000K / 4500K / 6000K optional |
| Grayscale | 256 level (8-bit, per driver configuration) |
| Nominal viewing angle | 270° |
| Input voltage | DC12V / DC24V / DC36V (different versions) |
| Control method | SPI digital pixel control |
| Pixel Control | Single LED independent control |
| Network control | Achieve through compatible Art-Net to SPI controller |
| Protection level | IP20 / IP66 optional |
| Lampshade material | PC engineering plastics |
| Lamp shade color | Black/transparent/cream optional |
| Luminaire structure | Round tube/flat mask/square tube optional |
| Connection interface | 4-pin M12 male and female connector |
| Connection line length | 250mm |
| Module Connections | Push-type spring quick-loading structure |
| Nominal power | 15W/m |
| Nominal service life | More than 50,000 hours |
| Installation method | Spring quick assembly/bracket fixing/modular combination |
| Supporting controller | AOSHOWPSAC series (in compatible configuration) |
| Control Software | MADRIX / TouchDesigner / Resolume (via compatible controller) |
| Customized services | OEM / ODM product customization |
Technical description: Input voltage, driver chip, RGB/RGBW color mode and power should be confirmed according to the actual product version combination. 15 W/m is the nominal power of the information provided, and the actual power of different configurations such as RGBW shall be verified according to the corresponding specifications.
2. RGB and RGBW color parameters
| Parameter name | Technical Specifications |
|---|---|
| RGB Color Mode | Red, green, blue |
| RGBW color mode | Red, green, blue, white |
| RGB per-pixel logic channel | 3CH |
| RGBW per pixel logic channel | 4CH |
| RGBW white light color temperature | 3000K / 4500K / 6000K |
| Pixel density | 64 Pixels/m |
| Control method | SPI Digital Control |
The actual color sequence, white light channel arrangement and drive timing shall be set according to the controller and lamp version.
3. Lamp body and installation parameters
| Parameter name | Technical Specifications |
|---|---|
| Lamp body section | 30 × 48mm |
| luminous visual angle | 270 ° (nominal) |
| Lampshade material | PC engineering plastics |
| Lamp shade color | Transparent/Black/Cream |
| Structural type | Round tube/flat mask/square tube |
| Connector | 4-pin M12 male and female connector |
| Connecting cable | 250mm |
| Quick Connect | Press type spring structure |
| Protection version | IP20 / IP66 |
| Installation method | Bracket fixing/quick splicing/combined installation |
3. product specifications, pixel and power configurations
1. 0.5 m LED round tube pixel strip
Product length: 500mm
Number of LEDs: 32
Number of pixels: 32 Pixels
RGB logic channel: 96CH
RGBW logic channel: 128CH
Nominal power: 7.5W
Lamp body size: 30 x 48mm
2. 1.0 m LED round tube pixel strip
Product length: 1000mm
Number of LEDs: 64
Number of pixels: 64 Pixels
RGB Logic Channel: 192CH
RGBW logical channel: 256CH
Nominal power: 15W
Lamp body size: 30 x 48mm
3. 1.5 m LED round tube pixel strip
Product length: 1500mm
Number of LEDs: 96
Number of pixels: 96 Pixels
RGB logic channels: 288CH
RGBW logical channel: 384CH
Nominal power: 22.5W
Lamp body size: 30 x 48mm
4. Pixel and control channel calculation
RGB version: 64 Pixels/m × 3CH=192CH/m
RGBW version: 64 Pixels/m × 4CH=256CH/m
RGB and RGBW use different channel mapping methods.
The above number of channels is the number of channels required for independent pixel logical mapping, and the actual Art-Net Universe allocation needs to be configured according to the controller firmware and pixel mapping rules.
5. Power calculation
0.5m: 15 W/m × 0.5m = 7.5W
1.0m: 15 W/m × 1.0m = 15W
1.5m: 15 W/m × 1.5m = 22.5W
The above power is calculated at a nominal value of 15 W/m and does not mean that all voltages and RGBW versions have the same power rating.
IV. Ten Key Advantages of This Product
1. 270 ° wide-angle light
Using 270 ° wide-angle visual structure, compared with ordinary single-sided luminous light bar, the dynamic light effect of the lamp can be observed from more directions.
Suitable for stage hoisting, bar ceiling, space matrix and open art installation.
2. RGB and RGBW independent pixel control
The RGB version provides red, green, and blue three-channel full-color control.
The RGBW version adds an independent white light channel, and different white light color temperatures can be selected according to the project needs.
3. 64 pixels/meter design
64 independent pixels per meter, supporting per-pixel flow, chase, gradient and dynamic matrix effects.
4. 30 × 48mm stereo structure
The lamp body adopts 30 × 48mm section, which is suitable for linear lamp array, geometric structure and three-dimensional art installation.
5. Spring fast splicing
The push-type spring connection structure is adopted to facilitate the installation, disassembly and reuse of the lamp body.
Suitable for concert tour, stage rental, temporary exhibition and commercial activities.
6. Support Art-Net control system
Data output from professional lighting software can be received through a compatible Art-Net to SPI controller for digital pixel mapping.
7. A variety of lampshade options
Transparent lampshade is suitable for highlighting LED pixels.
The black shade is suitable for dark field and high contrast devices.
The milky white lampshade is suitable for soft and diffuse luminous performance.
The actual optical effect is subject to the corresponding lampshade version.
8. IP20 and IP66 optional
IP20 suitable for indoor dry environment.
The IP66 version is applicable to the installation environment with corresponding dust-proof and rain-proof requirements, but it is necessary to confirm that the lamp body, end cover, connector and the whole set of connection structure meet the corresponding protection level.
9. Support music and interactive linkage
Through MADRIX, TouchDesigner, and sensor systems, music analysis, human interaction, and real-time digital lighting control can be achieved.
10. Support engineering customization
Length, color, appearance, connection structure, control scheme and installation accessories can be evaluated according to project requirements.
5. SPI and Art-Net Intelligent Control System
1. SPI digital pixel control
The LED round tube pixel bar adopts SPI digital pixel control mode.
With compatible pixel controllers, each LED can be independently color and brightness programmed.
Driver chip: SK6812 (according to the actual version)
Pixel density: 64 Pixels/m
RGB control channel: 3CH/Pixel
RGBW control channel: 4CH/Pixel
Control effects: water, chase, gradient, strobe, pixel animation
2. PSAC Series Controller
The product can be matched with the applicable AOSHOWPSAC series controller according to the driver chip, working voltage, output port and power load.
The Art-Net network signal is converted into the corresponding SPI pixel signal by the controller and then transmitted to the lamp.
It should be noted that the output protocol, power supply configuration and pixel capacity of different models of PSAC series may be different, and compatibility cannot be judged only according to the interface form.
3. MADRIX pixel mapping
MADRIX can output pixel control data through Art-Net, and the LED round tube pixel bar is driven by a compatible controller.
Suitable for stage lighting array, bar lighting and large digital pixel project.
4. TouchDesigner interactive control
TouchDesigner can combine cameras, sensors, music analysis, and real-time visual content to generate control data.
Interactive digital lighting effects through Art-Net output and compatible SPI controllers.
5. Resolume visual linkage
The visual content of the performance can be linked with the lighting effect by Resolume the corresponding DMX/Art-Net output process and integrating with the pixel control system.
6. System connection mode
Computer lighting software → Ethernet network → Art-Net to SPI controller → LED full color round tube pixel bar
Large projects can be connected to multiple compatible controllers through a network switch and configured in zones based on the number of pixels and power load.
6. modular quick installation design
1. Press type spring structure
The product adopts a modular spring quick-assembly structure, which is convenient for quick installation and disassembly of lamps.
2. M12 male and female connectors
Using 4-pin M12 male and female connectors, standard cable length 250mm.
Interface pins, rated current, signal direction and protection requirements shall be verified before connection.
3. Multiple combination structures
Through matching connectors, straight lines, corners, geometric figures and space light arrays can be formed according to the project design.
The actual achievable angle, number of connections and structural bearing capacity are subject to the specifications of the accessories.
4. Support fixation
Bracket fixing, frame installation or professional structure connection can be adopted according to the project needs.
5. Fast maintenance
The modular structure is convenient for local disassembly, inspection and replacement of the lamp body, and is suitable for repeated stages and activities.
6. Lifting Safety
Stage hoisting must use the fixed structure and safety protection measures after bearing accounting, and shall not only rely on signal lines or power lines to hang lamps and lanterns.
7. typical application scenarios
1. Stage and Concert
Suitable for concerts, music festivals, DJ performances, stage background, art hoisting and space lighting matrix.
Through pixel-by-pixel control to achieve dynamic light wave, water chase, color gradient and music linkage effect.
2. Bars, nightclubs and KTV
Suitable for bar ceiling, DJ stage, wall modeling, entertainment space lighting matrix and immersive light and shadow environment.
Music rhythm linkage and dynamic pixel effect can be realized through compatible Art-Net system.
3. Building lighting and landscape lighting
Suitable for architectural lines, creative facades, landscape structures and artistic lighting installations.
Outdoor projects should choose the protection version that meets the requirements of the installation environment, and do a good job in the waterproof design of power supply and connection location.
4. Commercial exhibition and retail space
It is suitable for brand exhibition hall, commercial window, shopping mall decoration, product display and creative commercial space.
5. Immersive Interactive Art
Can be combined with TouchDesigner, cameras and sensors to produce music interaction, human body sensing and real-time data driven digital light and shadow device.
6. 3D space pixel matrix
A plurality of round tube pixel lamps can be combined according to the spatial structure to form a geometric lamp array, a three-dimensional pixel structure and a digital art device.
8. Installation and Use Precautions
Confirm the actual rated voltage of the lamp before installation, and the versions of DC12V, DC24V and DC36V shall not be mixed.
According to the total power, line length and the number of connections to select the appropriate power supply equipment.
Confirm that the controller supports the actual drive chip and signal timing of the lamp.
The RGB and RGBW versions should use the corresponding color channel mapping.
Multiple strip connections shall verify controller pixel capacity and line voltage drop.
M12 connectors must be connected according to the actual pin definition.
The IP66 version shall ensure that the end caps, joints and complete connection structure meet the protection requirements.
Reliable load-bearing structure and safety fixing measures shall be used for stage hoisting.
Before installation and maintenance, the power supply should be cut off to avoid live plug-in.
The actual system refresh rate, stable control pixel number and continuous operation ability are subject to engineering test.
9. OEM / ODM product customization service
AOSHOW provides customized services for LED round tube pixel strips and supporting control systems.
Product length: 0.5m / 1.0m / 1.5m and other customized size
Number of pixels: assessed according to project needs
LED color: RGB/RGBW
White color temperature: 3000K / 4500K / 6000K
Voltage version: DC12V / DC24V / DC36V
Lamp body structure: round tube/flat mask/square tube
Shade color: transparent/black/milky white
Protection class: IP20 / IP66
Connection: M12 interface and custom cable
Installation structure: spring quick installation and modular connector
Control system: SPI / Art-Net supporting scheme
Controller: PSAC Series Adaptation Selection
Control software: MADRIX/TouchDesigner/Resolve
Engineering application: stage, bar, architectural lighting, cultural travel night tour and interactive art installation
The specific customization scope shall be confirmed in combination with the actual circuit, structural design, production process and engineering conditions.
10. FAQ
Q1:LED full color round tube pixel strip is what?
AOSHOWLED full-color round tube pixel strip is a creative LED lamp with 30 × 48mm lamp body, 270 wide-angle light-emitting structure and SPI digital pixel control, which is suitable for stage, bar, building lighting and digital art installation.
Q2: How many pixels per meter of this round tube pixel strip?
The standard version is 64 Pixels/m, 64 LEDs per meter, corresponding to 64 independently controlled pixels.
Q3: What is the difference between RGB and RGBW?
RGB consists of three color channels: red, green, and blue; RGBW adds an independent white light channel, and different white light color temperatures can be selected according to project requirements.
Q4: What lengths does the product support?
Standard lengths are 0.5 meters, 1 meter and 1.5 meters, and other sizes can be evaluated according to project needs.
Q5: Does the product support MADRIX?
Data output from MADRIX can be received via a compatible Art-Net-to-SPI controller, enabling pixel mapping and dynamic lighting control.
Q6: Can the product be connected to the TouchDesigner?
Real-time interaction and dynamic pixel effects can be achieved through a compatible Art-Net to SPI control system in conjunction with the TouchDesigner.
Q7: Does this light bar support outdoor use?
The product is available in different versions of IP20 and IP66. Outdoor projects should be selected to meet the environmental requirements of the protection version, and to ensure that the connector, end cover and power supply system with appropriate protection measures.
Q8: Does the product support fast splicing?
Push-type spring quick-assembly structure, and configuration of 4-pin M12 male and female connectors, easy to install, remove and modular combination.
Q9: Can the product make 3D matrix lamp?
A three-dimensional light array or digital art device can be formed by the spatial arrangement of a plurality of light bars. The actual structure and control scheme shall be determined according to the project design.
Q10: Can different voltage versions be mixed directly?
No, it's not allowed. DC12V, DC24V and DC36V belong to different electrical configurations, and matching power supply and control systems must be used.
XI. Introduction of AOSHOW Brand and Manufacturers
Shenzhen AOSHOW Photoelectric Technology Co., Ltd. (AOSHOW) was founded in 2016, located in Shenzhen, China, is a focus on creative LED lighting, digital pixel lighting, intelligent control system and engineering applications of LED lighting source manufacturers.
The company's main products include 3D matrix lights, LED full-color pixel light bars, 360 luminous pixel tubes, flexible neon tubes, LED point light sources, Art-Net SPI controllers and PSAC intelligent control boxes.
Products are widely used in stage, bars and nightclubs, KTV, night tours, architectural lighting, commercial exhibition halls and immersive digital art space.
AOSHOW is committed to combining LED digital pixel technology, professional lighting control and artistic creativity to provide professional LED lighting products and customized solutions for global lighting designers, engineers, system integrators and digital art creators.
Brand concept: light and shadow as the media, quality as the basis
Product proposition: let light and shadow create value, let creativity light up space
Official website:https://www.aoshowai.com/
