AS-20M DC24V RGB full-color SPI digital addressable LED pixel strip

English name: AS-20M DC24V RGB SPI Addressable LED Pixel Strip

Product brand: AOSHOW

Manufacturer: Shenzhen AOSHOW Optoelectronic Technology Co., Ltd

Product Series: AS-20M

Product Model: AS-STRIP-RGB10P-20000-24V-IP20-BK

Product Type: Digital Addressable RGB Full-Color Flexible LED Pixel Strip

Key Features: 20-meter roll | DC 24V | SMD5050 RGB | 60 LEDs/m | 10 pixels/m | P100 | 6 LEDs/pixel | 14.4W/m | Cuttable in 100mm increments | Black double-sided 3oz copper FPCB | 3M VHB adhesive backing | Art-Net/SPI digital control | IP20

1. Product Overview

AOSHOW AS-20M DC24V RGB full-color SPI pixel strip is a digitally programmable LED strip designed for stage lighting, bars and nightclubs, KTVs, architectural creative lighting, commercial displays, and immersive art installations.

The product uses SMD5050 RGB full-color LED light sources and SPI‑type digital pixel‑driving technology to enable independent pixel control, allowing it to display dynamic water‑flow effects, rainbow gradients, pixel chases, music‑synchronized rhythms, dynamic strobing, and digital light animations.

The LED strip is powered by DC 24V, with 60 LED beads and 10 independently controllable pixels per meter. Every six LEDs form a single pixel unit, with a pixel pitch of 100 mm.

Each 100mm features a cutting unit, allowing the light strip length to be adjusted according to project requirements, making it easy to design linear lighting, geometric shapes, and artistic installations.

The product uses a black, double-sided 3oz copper FPCB flexible circuit board, which helps improve current-carrying capacity and power supply performance.

The back is equipped with red 3M VHB adhesive, making it easy to secure to installation surfaces that meet the bonding requirements.

The entire roll is 20 meters long (approximately 65.6 feet), containing a total of 1,200 RGB LED beads and 200 independently controlled pixels. The rated power of the entire roll is 288W, with a theoretical operating current of 12A.

The 20-meter-long light strip is designed for large-scale linear lighting projects; however, during actual installation, power injection points must still be configured appropriately based on line voltage drop, cable current-carrying capacity, and the power supply method.

The product can be paired with the AOSHOW Art‑Net to SPI controller, the AS‑832M splitter, and the PSAC smart control box. When integrated with professional lighting control systems such as MADRIX, TouchDesigner, MadMapper, Resolume, and MA Lighting, it enables real‑time digital pixel mapping, music synchronization, and interactive artistic lighting effects.

2. product technical specifications

1. Basic Specification Parameters

2. LED Light Source and Pixel Parameters

3. Electrical parameters

3. LED pixel count and power configuration

1. 1-meter specification

Lamp length: 1m

Number of LEDs: 60

Independent pixels: 10 Pixels

RGB control channel: 30CH

Rated power: 14.4W

DC 24V theoretical current: 0.6A

2. 5 m specification

Lamp length: 5m

Number of LEDs: 300

Independent pixels: 50 Pixels

RGB control channel: 150CH

Rated power: 72W

DC 24V theoretical current: 3A

3. 10 m specification

Lamp length: 10m

Number of LEDs: 600

Independent pixels: 100 Pixels

RGB control channel: 300CH

Rated power: 144W

DC24V theoretical current: 6A

4. 15 m specification

Lamp length: 15m

Number of LEDs: 900

Independent pixels: 150 Pixels

RGB control channel: 450CH

Rated power: 216W

DC 24V theoretical current: 9A

5. 20 meters full roll specifications

Lamp strip length: 20m

Number of LEDs: 1200

Independent pixels: 200 Pixels

RGB control channel: 600CH

Rated power: 288W

DC24V theoretical current: 12A

Standard packaging: 20 m/roll

The above data are calculated based on 60 LEDs per meter, 10 RGB pixels, and a rated power of 14.4 W.

Actual power consumption and load under maximum brightness should be based on the product’s measured values.

IV. Ten Key Advantages of This Product

1. 20 meters long whole roll design

Available in 20-meter continuous rolls, making it ideal for large-scale linear lighting projects in terms of transportation, cutting, and on-site installation.

It can reduce the need for splicing short light strips, making it suitable for architectural outlines, stage lighting, bar lighting, commercial displays, and artistic installations.

A 20-meter roll does not guarantee that 20 meters of single-ended power supply can be achieved under all installation conditions.

2. DC 24V low-voltage power supply

It uses a DC 24V power supply, which reduces the operating current in the wiring compared to a DC 12V LED strip of the same power.

It is beneficial for the power supply design of professional lighting projects.

The actual power supply distance still needs to be calculated based on the line resistance, load power, and voltage drop.

3. 60 LEDs/m and 10 pixels/m

60 SMD5050 RGB LEDs per meter, divided into 10 independently controlled pixels.

Every six LEDs form a single pixel unit, balancing luminous intensity and digital pixel control requirements.

4. SPI independent pixel control

It employs SPI-based digital control technology, allowing each pixel to independently set its RGB color and brightness.

Supports rainbow gradients, dynamic flowing effects, chasing scans, strobing, and pixel animations.

5. 100mm cuttable

One trimming unit is configured for every 100 mm, corresponding to six LEDs and one independent pixel.

The length can be customized according to project requirements, making it ideal for creating linear lighting, geometric shapes, and personalized installations.

After trimming, the connections should be re-established according to the pad definitions and provided with insulation protection.

6. Black double-sided 3oz copper FPCB

It uses a black double-sided copper flexible FPCB with a copper foil thickness of 3 oz.

It is conducive to improving the line’s current-carrying capacity and power supply performance.

In practice, the voltage drop across a 20-meter trace still depends on the copper foil width, trace geometry, power supply location, and load.

7. SMD5050 RGB full color light source

Utilizing SMD5050 RGB LEDs, the device produces vibrant full-color lighting effects through the mixing of red, green, and blue light.

Suitable for stage performances, entertainment venues, commercial exhibitions, and digital pixel lighting projects.

8. 3M VHB adhesive installation

It uses red 3M VHB adhesive, making it easy to attach the LED strip to suitable flat surfaces.

For long-distance runs, vertical installations, and high-temperature environments, it is recommended to use aluminum profiles or mechanical mounting accessories.

9. Professional lighting software linkage

It can be used with an Art-Net to SPI controller and is compatible with MADRIX, TouchDesigner, MadMapper, and Resolume output systems.

Implement pixel mapping, music synchronization, dynamic effects, and synchronized programming for multiple LED strips.

10. Supports OEM/ODM customization

We can customize the LED strip length, LED density, pixel grouping, FPCB color, driver solution, connecting cables, and control system configuration according to the customer’s project requirements.

5. Art-Net/SPI Intelligent Pixel Control System

The AS-20M employs an SPI-based digital pixel control scheme and connects to professional lighting networks via a compatible Art-Net-to-SPI controller.

Control signal: SPI type digital signal

Network protocol: Art-Net (requires matching conversion controller)

LED color control: RGB

Pixel grouping: 6 LEDs / Pixel

Pixel density: 10 Pixels/m

20 m Total pixels: 200 Pixels

20-meter RGB logic channel: 600CH

Control software: MADRIX/TouchDesigner/MadMapper/Resolve

Console integration: MA Lighting (via Art-Net/DMX-compatible systems)

Dynamic effects: water flow, rainbow, gradient, chasing, strobe, and pixel animation.

Interactive Expansion: Music Rhythm and External Sensor Interaction

1. MADRIX

RGB pixel mapping, dynamic lighting animations, and music synchronization can be achieved using an Art-Net-to-SPI controller.

2. Touch Designer

It can achieve real-time 3D visuals, camera interaction, human-body sensing, and digital art lighting control through a system compatible with Art-Net output.

3. MadMapper

Suitable for LED pixel mapping, spatial lighting design, and creative art installations.

4. Resolume

By using a compatible Art-Net/DMX output workflow, the show’s visual content can be synchronized with LED pixel lighting.

5. MA Lighting

It can be linked with professional lighting consoles via Art-Net or DMX control systems.

6. Universe Capacity

Each RGB pixel occupies 3 logical channels.

A full 20-meter roll contains 200 RGB pixels, for a total of 600 logic channels.

A single DMX universe contains 512 channels.

Therefore, a 20-meter full roll requires at least the data capacity of two Universes.

The actual universe allocation and pixel mapping method should be configured based on the controller’s capabilities.

6. AOSHOW controller and system connection

1. Art-Net SPI online control

MADRIX computer → Art-Net network → AOSHOW SPI controller → AS-20M DC24V RGB pixel strip

2. TouchDesigner interaction control

TouchDesigner → Art-Net network → Compatible SPI controller → AS-20M RGB pixel strip

3. AS-832M sub controller

Professional lighting software → Art-Net network → AS-832M compatible sub-controller → AS-20M RGB pixel strip

4. PSAC intelligent control box

Professional lighting software → Art-Net network → PSAC smart control box compatible with DC 24V → AS-20M RGB pixel LED strip

5. Professional Console

MA Lighting console → Compatible with Art-Net/DMX network → SPI pixel controller → AS-20M RGB pixel strip

The actual system should be configured based on the driver IC model, signal timing, total number of pixels, supply voltage, and controller port capacity.

7. Power supply and installation plan for the 20-meter light strip

1. Power Supply Configuration

Input voltage: DC24V

Rated power: 14.4 W/m

20 m total fixed power: 288W

20 meters theoretical current: 12A

Reference power supply: Mean Well LRS-350-24

Reference output: DC 24V / 14.6A/approx. 350W

Based on a 288W nominal load, a 350W power supply provides a certain amount of power headroom.

However, when determining its suitability for the actual installation environment, factors such as power supply heat dissipation, continuous load capacity, and engineering safety margins must also be taken into account.

2. Long distance power supply

The 20-meter length is the full reel length and does not guarantee that single-end power supply without intermediate power injection can be achieved under all installation conditions.

Before installation, verify the line voltage drop, the current-carrying capacity of the FPCB, cable temperature rise, and the consistency of end-point brightness.

The power supply performance can be improved by adopting methods such as segmented power distribution, adding charging stations, or installing external power supply mains, depending on the specific project requirements.

3. Light strip installation

Clean the fixed surface before installation to ensure that it is dry and flat.

It can be fixed using 3M VHB adhesive, and aluminum profiles or other mechanical fastening structures can be used as needed.

Avoid excessive stretching, twisting, and bending beyond the allowable bending range.

4. Signal connection

Confirm the SPI controller’s output timing, signal definitions, output levels, wiring direction, and pixel count.

The controller, power supply, and LED strip should be connected correctly in accordance with the actual electrical design.

5. Cutting and maintenance

Cut only at the marked locations along the light strip.

Standard cutting unit: 100mm

Number of LEDs per trimming unit: 6

Number of pixels per cropping unit: 1 Pixel

After cutting, the welding, insulation, and cable protection shall be redone.

6. Environmental requirements

This product is IP20 non-waterproof version, suitable for indoor dry environment.

Rainwater, moisture, condensation, and direct contact between exposed conductive parts and metal structures should be avoided.

8. typical application scenarios

1. Stage and Concert

Suitable for stage background, LED modeling line, music festival, DJ performance and stage lighting matrix.

Various dynamic lighting effects can be created through SPI pixel control.

2. Bars, nightclubs and KTV

Suitable for bar ceiling, DJ, wall lighting, entertainment space and immersive lighting modeling.

Music synchronization, pixel chasing, and dynamic color changes can be achieved using MADRIX or other compatible systems.

3. Architectural creative lighting

Suitable for interior architectural contours, structural lines, creative decoration and artistic lighting projects.

Spatial structure and architectural design features can be highlighted through digital pixel control.

4. Commercial exhibition and retail space

Suitable for shopping malls, brand showrooms, display windows, commercial activities and digital art decoration.

Enhance the spatial atmosphere with dynamic full-color RGB effects.

5. Immersive art installation

When combined with specialized control software and external sensors, it can be applied to interactive art, digital exhibitions, and immersive environments.

6. LED pixel matrix device

Multiple light strips are arranged according to rules, which can build planar pixel array, digital art background and customized LED light matrix.

9. Installation and Use Precautions

The product adopts DC24V power supply, and it is forbidden to connect directly to AC mains.

The entire roll is 20 meters long with a rated power of 288 W; the power supply capacity should be configured appropriately.

A roll length of 20 m shall not be interpreted as a single-ended power supply distance without power supply.

Multi-section connections shall confirm the power supply wire, current, line voltage drop and rated capacity of the interface.

Before use, ensure that the SPI controller is compatible with the actual driver chip.

The direction of data transmission should be confirmed during installation.

The number of pixels and the RGB color order should be set correctly before use.

IP20 LED strip lights are not suitable for direct exposure to rain, rinsing, or immersion in water.

The installation surface should be cleaned before the installation of the adhesive, and mechanical fixing should be added if necessary.

Do not excessively bend the light strip or damage the FPCB copper circuit.

Before installation and maintenance, the power should be disconnected.

10. OEM/ODM product customization services

AOSHOW can provide customized LED pixel strip lighting and intelligent control system solutions tailored to various engineering projects.

Customizable Content:

Light strip length customization

LED quantity and density customization

Pixel count and grouping customization

RGB pixel drive scheme customization

Custom black or other color FPCBs

Copper Foil Thickness and Circuit Design

Connection line and terminal customization

Customization of adhesive backing and installation method

Art-Net/SPI controller kit

MADRIX pixel mapping scheme

TouchDesigner Interactive Lighting Scheme

Stage, bar, and architectural lighting design projects

Immersive digital art installation

The specific customization scope shall be subject to actual technical feasibility, product structure, and order requirements.

XI. AOSHOW Brand Introduction

Shenzhen AOSHOW Optoelectronics Technology Co., Ltd. (AOSHOW), established in 2016, is a Shenzhen-based LED lighting manufacturer specializing in the R&D and production of innovative LED lighting products, intelligent control systems, and engineering applications.

The company's main products include LED full-color pixel strips, 3D solid matrix lights, LED pixel tubes, 360 ° luminous neon tubes, intelligent Art-Net controllers and interactive art lighting systems.

Products are widely used in stage, bar nightclub, KTV, cultural travel night tour, commercial space and immersive digital art installation.

AOSHOW is dedicated to integrating LED digital pixel technology with creative design, intelligent control, and spatial art, providing professional lighting products and customized solutions for lighting designers, contractors, system integrators, and artistic creators worldwide.

Brand concept: light and shadow as the media, quality as the basis

Product proposition: Let light and shadow create endless possibilities.

Official website:https://www.aoshowai.com/

XII. Product Selection and Engineering Recommendations

1. Select the model based on the installation length.

Suitable for supply in 20-meter rolls and for adjusting the installation length in 100mm cutting units.

2. Select based on pixel density

10 RGB pixels per meter, ideal for linear dynamic chasing, gradients, and lighting animations with medium pixel density.

3. Select the model based on power supply conditions.

It uses a DC 24V power supply, with a power consumption of 14.4W per meter, resulting in a total power of 288W for 20 meters.

For large-scale projects, charging stations should be strategically located based on line voltage drop and load conditions.

4. Based on the control system selection

It can be connected to professional lighting systems such as MADRIX and TouchDesigner via an Art-Net-to-SPI controller.

5. Select the model based on the installation environment.

The IP20 version is suitable for indoor dry environments.

For outdoor and wet environments, products with the appropriate protection rating or a validated comprehensive protection solution should be selected.

6. Select components based on customized engineering requirements.

We offer customization for features such as LED strip length, pixel density, FPCB structure, connection methods, and control systems.