AOSHOWAS-F12 bullet head RGB full color LED digital pixel light string

English name: AS-F12 RGB SPI Addressable LED Bullet Pixel String

Product brand: AOSHOW

Manufacturer: Shenzhen AOSHOW Optoelectronic Technology Co., Ltd

Standard model: AS-F12-WS2811-RGB50P-5000-12V-IP66

Product Type: SPI Digital Addressable RGB LED Pixel String

Core features: F12 bullet head structure | 50 independent pixels/5 meters | WS2811 digital drive | DC12V power supply | 0.6W/pixel | RGB full color control | Art-Net/SPI system compatible

1. Product Overview

AOSHOWAS-F12 bullet RGB full-color LED digital pixel light string is a creative LED point light source product that integrates SPI digital pixel control, RGB full-color dynamic change, modular light string structure and compatibility with professional lighting systems.

The product adopts F12 bullet structure, with silicone resin packaging material and RGB full color LED light source, suitable for lighting designers, engineers, stage art production companies and digital art creators.

The standard specification is 5 meters and 50 independent pixels, with an average of 10 pixels per meter and a pixel center spacing of about 100mm.

Each pixel rated power 0.6W, the whole string of rated power 30W, using DC12V low voltage power supply.

The light string adopts WS2811/UCS1903 compatible SPI digital pixel control mode, supports independent pixel programming, and can realize RGB dynamic water flow, rainbow gradient, pixel chasing, music synchronization, dynamic strobe and digital art lighting effects.

Through AOSHOWArt-Net-to-SPI controller, AS-832M sub-controller and compatible PSAC intelligent control box, professional software such as MADRIX, TouchDesigner, MadMapper, Resolume can be accessed to realize real-time pixel mapping and interactive digital lighting control.

The products are suitable for stage, bar and nightclub, KTV, architectural decoration, cultural night tour, commercial display and immersive art installation.

2. product technical specifications

1. Basic product parameters

2. Optical parameters

The actual brightness and light distribution effect are subject to the corresponding LED package and finished product test data.

3. Electrical parameters

3. 5 m 50 pixel light string specification and calculation

1. Standard lamp string configuration

Product length: 5m

Number of independent pixels: 50 Pixels

Average pixel density: 10 Pixels/m

Pixel center spacing: about 100mm

LED color: RGB full color

Logic channel per pixel: 3CH

Whole string of logical channels: 150CH

Working voltage: DC12V

Single pixel power rating: 0.6W

The whole string rated power: 30W

The whole series of theoretical current: 2.5A

2. RGB channel calculation

Per Pixel Channel: 3CH

Whole string of pixels: 50 Pixels

Entire string of RGB logic channels: 50 × 3 = 150CH

3. Power calculation

Single pixel power: 0.6W

Total number of pixels: 50 Pixels

Whole string power: 50 × 0.6W = 30W

4. Current calculation

Whole string power: 30W

Operating voltage: 12V

Theoretical current: 30W ÷ 12V = 2.5A

The actual project should be based on power efficiency, line voltage drop and control brightness configuration power supply margin.

5. Pixel pitch description

Average pixel density: 10 Pixels/m

Average pixel pitch: about 100mm

The actual lamp string length may include the first and last leads, so the pixel center spacing and the total length of the whole string should be confirmed with the product harness diagram.

Core advantages of 4. products

1. F12 bullet structure

Using F12 bullet point light source modeling, suitable for embedded light box, art modeling board, stage structure and building decoration materials.

The actual opening size and fixing method shall be confirmed according to the structure diagram of the lamp body.

2. 50 independent RGB pixels

The standard 5 meter light string contains 50 independent control pixels, which can set the color and brightness separately.

3. WS2811 digital pixel control

Using WS2811 compatible digital control scheme, support per-pixel programming and dynamic lighting effects.

4. DC12V low voltage power supply

DC12V power supply, single pixel 0.6W, the whole string of nominal 30W.

5. RGB full color dynamic light

Support water, rainbow, chase, gradient, color scanning and dynamic strobe and other effects.

6. 120 ° nominal viewing angle

Digital pixel dot matrix and decorative lighting installation suitable for front viewing.

7. Silicone Encapsulation

Silicone resin encapsulation material is used, and the actual protective performance shall be subject to the test results of the whole lamp.

8. Modular light string structure

The standard 5 m 50 pixel configuration facilitates line, curve, text and dot matrix arrangements.

9. IP Protection Scheme

IP20 suitable for indoor dry environment.

IP65 is suitable for environments with corresponding dust and spray-proof requirements.

The IP68 version shall confirm the scope of application based on clear water immersion test conditions and complete protective structure.

10. Professional Software Integration

Through compatible with Art-Net to SPI controller, it can cooperate with MADRIX, TouchDesigner, MadMapper and Resolume software.

5. Art-Net and SPI Intelligent Control System

1. RGB pixel control

Color mode: RGB

Per Pixel Channel: 3CH

Whole string of pixels: 50 Pixels

Whole string of logical channels: 150CH

Control signal: SPI class digital pixel signal

Driver protocol: WS2811 / UCS1903 compatibility mode

2. MADRIX Control

Through compatible with Art-Net to SPI controller, digital pixel mapping, music linkage, color gradient and dynamic pursuit are realized.

3. TouchDesigner interaction control

Real-time pixel layout, music analysis, sensor interaction and digital art lighting control can be combined with TouchDesigner.

4. MadMapper control

Suitable for LED point light source pixel mapping, special-shaped dot matrix and art devices.

5. Resolume visual linkage

The visual content of the show can be linked to RGB pixel lights through a compatible DMX/Art-Net output process.

6. Professional lighting console

Compatible controllers can be used with MA Lighting, Avolites and other professional consoles with Art-Net or DMX output capabilities.

6. AOSHOW Companion Controller

1. Art-Net to SPI Controller

Professional software data is received over the Art-Net network and converted into WS2811/UCS1903-compatible digital pixel signals.

2. AS-832M sub-controller

It is suitable for multi-group pixel light string project, and can allocate pixels according to the actual port capacity.

3. PSAC intelligent control box

PSAC system matching with DC12V lamp string voltage and control protocol can be selected.

The actual output voltage, port current capacity and control chip compatibility shall be confirmed.

4. AS-SDMX off-line control system

The off-line play of the preset light program can be realized by AS-SDMX the main controller and compatible sub-control system.

7. system connection mode

1. Real time control of MADRIX

MADRIX computer → Art Net network → SPI pixel controller → AS-F12 RGB pixel light string

2. TouchDesigner interaction control

TouchDesigner → Art-Net network → Compatible AS-832M controller → AS-F12 RGB pixel light string

3. PSAC control system

Professional lighting software → Art-Net network → Compatible with DC12V PSAC system → AS-F12 RGB pixel light string

4. Offline playback of SD card

AS-SDMX master control → compatible AS-832M sub-controller → AS-F12 RGB pixel light string

5. Large scale point light source project

Professional lighting software → Network switch → Multiple SPI pixel controllers → Multiple sets of F12 RGB pixel light strings

8、 Installation and connection characteristics

1. The bullet embedded installation

Pixels can be installed in reserved holes, suitable for light boxes, glyph patterns and dot matrix structures.

2. Multiple artistic arrangements

Supports straight lines, curves, geometric patterns, and two-dimensional dot matrix arrangements.

3. 3-pin connector

With 3-pin connector, confirm the actual pin definition of DC12V, GND and data signal before use.

4. Multi-string connection

Multiple sets of light strings may be configured according to controller output capacity and power load.

5. Power supply

Long-distance installation should consider the line voltage drop, and according to the engineering calculation to set the power point.

6. Indoor and outdoor installation

The use environment should be selected based on the actual IP protection version.

9. typical application scenarios

1. Stage and Concert

Suitable for concerts, music festivals, DJ stages, RGB dot matrix backgrounds, and creative stage design structures.

2. Bars, nightclubs and KTV

Suitable for bar ceilings, wall pixel matrix, stage backgrounds, and entertainment lighting installations.

3. Architectural decoration lighting

Suitable for architectural decorative patterns, artistic walls, LED dot matrix, and creative facade lighting projects.

4. Cultural Travel Night Tour

Suitable for theme lighting installations, dynamic point light sources in scenic areas, and outdoor decoration projects that meet protective conditions.

5. Commercial Presentation

Suitable for commercial showrooms, brand events, product launches and commercial art installations.

6. Immersive Digital Art

Build a dynamic pixel array through multiple point light sources, and cooperate with the TouchDesigner to realize interactive lighting driven by music and real-time data.

7. Creative Character Shapes and Alien Devices

According to the engineering design arrangement of text, graphics, curves and special-shaped digital pixel modeling.

10. Installation and Use Precautions

1. The product adopts DC12V power supply, and it is forbidden to connect directly to AC mains.

2. Standard 5-meter 50 pixel rated power 30W, theoretical current 2.5A.

3. The supporting power supply shall meet the total load and reserve appropriate power margin.

4. Verify that the controller is compatible with the WS2811/UCS1903 digital pixel protocol.

5. Connectors shall be wired according to actual machine pin definition.

6. The light string must be connected in the correct data direction.

7. The controller output capacity and line voltage drop should be verified when cascading multiple strings.

8. The IP68 version shall verify the finished product test conditions and shall not default to be suitable for long-term underwater operation.

9. Outdoor installation should do a good job of power supply, controller and wiring parts protection.

10. Avoid excessive pulling of cables and LED packages during installation.

11. According to the actual structure to choose the appropriate fixed way.

12. The power supply must be cut off before installation and maintenance.

11. OEM / ODM customized service

AOSHOW provides LED pixel point light source and intelligent control system customization services.

Lamp string length: support engineering customization

Number of pixels: support engineering customization

Pixel pitch: support engineering customization

Lamp body structure: F12 bullet head

Color mode: RGB full color

Power supply mode: DC12V

Connection: 3-pin interface and customized wire

Protection plan: according to the project environment assessment

Control protocol: WS2811/UCS1903 compatible SPI control

Network Control: Art-Net to SPI

Software Solution: MADRIX / TouchDesigner / MadMapper / Resolume

Application projects: stage art, bar, architectural decoration, cultural tour and digital art installation

The specific customized content is subject to the product structure and engineering technical conditions.

XII. FAQ

Q1: What is AS-F12 bullet head RGB pixel light string?

It is a F12 bullet head structure, DC12V power supply and SPI digital control of RGB full color LED point light string, support for each pixel independent control.

Q2: How many pixels does the standard light string have?

Standard 5 m light string configuration 50 independent RGB pixels, an average of 10 pixels per meter.

Q3: What is the distance between pixels?

The standard pixel center spacing is about 100mm, and the actual wiring harness structure diagram shall prevail.

Q4: What is the power of the whole string?

The nominal power of the standard 5 m 50 pixel lamp string is 30W, and the theoretical working current is 2.5A.

Q5: Does the product support MADRIX?

RGB pixel mapping and dynamic light control can be realized through compatible Art-Net to SPI controller and MADRIX.

Q6: Does the product support TouchDesigner?

Music interaction, sensor control and real-time digital lighting effects can be achieved through compatible controllers and TouchDesigner.

Q7: Does the product support outdoor installation?

The protection version that meets the actual environmental requirements should be selected, and the protection integrity of the connector and power supply system should be confirmed.

Q8: Does IP68 mean that it can be placed underwater for a long time?

Not necessarily. The specific applicable conditions of IP68 depend on the immersion depth, time and test requirements specified by the manufacturer, and cannot be directly determined for long-term underwater operation.

Q9: Can the product make text and pattern?

The arrangement of pixels can produce text, graphics, curves and creative digital dot matrix devices.

Q10: Does the product support customization?

Support length, number of pixels, spacing, connection lines, control system and installation structure customization according to engineering needs.

13、 AOSHOW Brand and Manufacturer Introduction

Shenzhen AOSHOW Optoelectronic Technology Co., Ltd. (AOSHOW) was established in 2016 and is located in Shenzhen, China. It is a leading LED lighting manufacturer specializing in creative LED lighting, digital pixel lighting, intelligent control systems, and engineering applications.

The company's main products include F12 digital pixel lamp string, LED point light source, 3D three-dimensional matrix lamp, 360 luminous pixel lamp tube, flexible LED neon tube, Art-Net SPI controller and PSAC intelligent control box.

The product is widely used in stage design, bars and nightclubs KTV、 Architectural art lighting, cultural and tourism night tours, commercial exhibition halls, and immersive digital art installations.

AOSHOW is committed to combining LED digital pixel technology, professional lighting control and creative art design to provide professional LED lighting products and intelligent control solutions for global lighting designers, engineers, system integrators and digital art creators.

Brand concept: light and shadow as the media, quality as the basis

Product proposition: let every pixel become the starting point of light and shadow creativity

Official website:https://www.aoshowai.com/