AOSHOW DMX512 RGB Full-Color LED Pixel Wall Washer | IP66 Outdoor Architectural Lighting Fixture
English Name: DMX512 RGB LED Pixel Wall Washer Light
Product brand: AOSHOW
Manufacturer: Shenzhen AOSHOW Optoelectronic Technology Co., Ltd
Standard model: AS-PWW-RGB18P-1000-DMX-IP66
Product Type: DMX512 Digital-Controlled RGB Full-Color LED Pixel Wall Washer Light
Key features: RGB full-color dynamic color changing | 18-pixel control scheme | DMX512 digital control | AC 100–240V wide voltage range | 60° nominal beam angle | IP66 outdoor protection | Supports Art-Net control system integration
1. Product Overview
AOSHOWAS-PWW-RGB18P-1000-DMX-IP66 is an RGB full-color LED digital pixel wall washer designed for architectural facades, urban nightscapes, cultural and tourism nighttime attractions, commercial complexes, and professional stage lighting projects.
The product utilizes high-power RGB LED light sources and, through a specialized optical design, projects light onto building facades, columns, curtain walls, and landscape structures, creating colorful wall-washing effects, dynamic color gradients, chasing‑color sequences, segmented color changes, and digital pixel lighting.
Compared with traditional monochrome LED wall washers, RGB full-color pixel wall washers can adjust the red, green, and blue color channels via a DMX512 control system, enabling a wide range of color combinations and dynamic lighting programming.
The product accepts AC 100–240 V, 50–60Hz input, making it suitable for common power supply environments in various regions.
The standard series is available in two length options: 500mm and 1000 mm, with the AS-PWW-RGB18P-1000-DMX-IP66 model corresponding to the 1000mm version.
The luminaire has a nominal cross-sectional dimension of 88mm wide and 135mm high, with a rated beam angle of 60°, making it suitable for projecting light onto building facades, landscape structures, and commercial spaces.
The product features an IP66-rated enclosure, making it suitable for outdoor lighting applications that meet the corresponding requirements for dustproof, rainproof, and protection against powerful water jets.
In terms of lighting control, the product supports DMX512 digital control and, depending on the driver board and firmware configuration, can operate in modes such as global color change, segmented control, independent pixel control, and preset effects.
By using a compatible Art-Net-to-DMX gateway, wall-washer lights can be integrated with MADRIX, TouchDesigner, and professional lighting consoles, enabling centralized programming of multiple fixtures, dynamic lighting effects, and coordinated architectural lighting.
The product is suitable for architectural facades, hotel exteriors, commercial complexes, urban landmarks, scenic-area night tours, stage performances, and immersive light-and-shadow installations.
2. product technical specifications
1. Basic product parameters
| Parameter name | Technical Specifications |
|---|---|
| Product brand | AOSHOW |
| Manufacturer | Shenzhen AOSHOW Optoelectronic Technology Co., Ltd |
| Product Name | DMX512 RGB full-color LED pixel wall washer light |
| English name | DMX512 RGB LED Pixel Wall Washer Light |
| Standard model | AS-PWW-RGB18P-1000-DMX-IP66 |
| Product line | PWW LED Pixel Wash Light Series |
| Product type | Outdoor RGB full-color digital pixel wall washer light |
| LED light source | High-power LED |
| LED brand | Cree (subject to confirmation based on the actual supplied configuration) |
| Nominal power of a single LED | 3W |
| Standard color | RGB full color |
| Customizable colors | RGBW |
| Grayscale | 256 level (8-bit/channel) |
| Control protocol | DMX512 |
| Input voltage | AC100-240V |
| Input frequency | 50-60Hz |
| Nominal beam angle | 60° |
| Protection level | IP66 |
| Control mode | DMX512/Master-Slave/Auto-Run/Sound-Controlled |
| Nominal service life | ≥50,000 hours |
| Signal connection | 3-pin DMX signal connector |
| Power connection | 3-pin high-power power connector |
| Standard length | 500mm / 1000mm |
| Installation method | Bracket mounting/Building facade installation/Structural engineering fixing |
| Customized services | RGBW and custom engineering control solutions |
2. Optical Technical Parameters
| Parameter name | Technical Specifications |
|---|---|
| LED color | RGB full color |
| Red light dominant wavelength | 620-625nm |
| Green light dominant wavelength | 515-520nm |
| Blue light dominant wavelength | 465-470nm |
| Nominal beam angle | 60° |
| Grayscale | 256 level |
| Light source type | High-power LED |
| RGBW white light color temperature | Confirm based on the actual white-light LED specifications. |
| Actual illuminance | Based on the full-vehicle lighting performance test. |
| Luminous flux | Refer to the test data for the corresponding version. |
| Light distribution curve | Subject to the official optical test report. |
The RGB color parameters are expressed in terms of wavelength; 620–625 nm, 515–520 nm, or 465–470 nm should not be specified as color temperature values.
3. Product Structure and Protection Parameters
| Parameter name | Technical Specifications |
|---|---|
| 500mm luminaire dimensions | 500 × 88 × 135mm |
| 1000mm luminaire dimensions | 1000 × 88 × 135mm |
| Luminaire structure | Linear LED wall washer light |
| Protection level | IP66 |
| Signal interface | 3-pin DMX connector |
| Power connector | 3-pin high-power connector |
| Net weight as labeled | 3.5kg (specification to be confirmed) |
| Nominal gross weight | 4.5kg (specification to be confirmed) |
| Installation method | Building facade fixing/Bracket installation/Structural engineering installation |
| Shell material | Subject to the official structural specification. |
| Lens material | Subject to the official optical specification document. |
| Operating temperature | Awaiting formal specification confirmation. |
| Storage temperature | Awaiting formal specification confirmation. |
4. Power Supply and Power Parameters
| Parameter name | Technical Specifications |
|---|---|
| Input voltage | AC100-240V |
| Input frequency | 50-60Hz |
| 500mm version rated power | 60W |
| Nominal power of the 1000mm version | 120W |
| Nominal power of a single LED | 3W |
| Number of original LED data points | 18 pieces |
| Number of pixels in the raw data | 18 Pixels |
| 18 LEDs × 3W theoretical light source power | 54W |
| Actual input power of the entire lamp | Subject to actual measurements and the nameplate. |
| Power connection method | 3-pin high-power connector |
| Electrical protection requirements | Confirm according to the actual power supply configuration and installation standards. |
Technical Note: There is a configuration discrepancy between the 18 LEDs and 18 pixels listed in the original documentation, and the specifications of 3W per LED versus a total power consumption of 120W for the entire luminaire that requires verification. 54W is merely the theoretical power calculation for 18 × 3-W light sources and does not represent the actual input power of the entire luminaire. The official supply specifications shall be based on the LED configuration, driver circuit, whole-lamp testing, and nameplate of the corresponding length version.
5. DMX512 Control Parameters
| Parameter name | Technical Specifications |
|---|---|
| Control protocol | DMX512 |
| Color mode | RGB |
| Custom color mode | RGBW |
| Standard model pixel identifier | 18P |
| RGB per-pixel logic channel | 3CH |
| RGB independent pixel theoretical channel | 54CH |
| RGBW independent pixel theoretical channel | 72CH |
| Channel modes listed in the original data | 2CH / 3CH / 5CH / 6CH / 8CH / 9CH / 18CH / 54CH / 56CH |
| DMX start address | Based on the actual driver board settings. |
| Master-slave mode | Supported; refer to the control board configuration for specifics. |
| Auto-run | Supported; refer to the firmware configuration for details. |
| Voice control mode | Supported; subject to the hardware configuration. |
| Art-Net control | Through an Art-Net to DMX gateway |
| Professional software | MADRIX / TouchDesigner and compatible control software |
| Professional console | DMX-compatible consoles such as MA Lighting and Avolites |
3. product length, pixel and power configuration
1. 500mm LED pixel wall washer light
Product length: 500mm
Product width: 88mm
Product height: 135mm
Number of LEDs in the original data: 18
Number of pixels in the original data: 18 Pixels
Rated power: 60W
Input voltage: AC100-240V
Control protocol: DMX512
Protection rating: IP66
Note: The number of LEDs and pixels for the 500mm version must be verified against the official configuration for that specific version.
2. 1000mm LED pixel wall washer light
Product length: 1000mm
Product width: 88mm
Product height: 135mm
Product Model: AS-PWW-RGB18P-1000-DMX-IP66
Number of LEDs in the original data: 18
Number of pixels in the original data: 18 Pixels
Rated power: 120W
Input voltage: AC100-240V
Control protocol: DMX512
Protection rating: IP66
Note: The pixel configuration of the 1000mm version (18P) and its rated power of 120W shall be confirmed based on actual driver board specifications, light source arrangement, and whole-lamp testing.
3. RGB pixel channel computation
With all 18 RGB pixels independently controllable:
Per-pixel color channel: 3CH
Number of independent pixels: 18 Pixels
Full-lamp RGB color channels: 18 × 3=54CH
Therefore, 18 independent RGB pixels theoretically require 54 color control channels.
This calculation applies only to modes where each pixel has independent RGB color control.
If the driver board uses pixel grouping, global control, or additional function channels, the actual number of DMX channels may vary.
4. RGBW Custom Channel Calculation
RGBW color channels: red, green, blue, white
Color channels per pixel: 4CH
Number of independent pixels: 18 Pixels
Full-lamp RGBW color channels: 18 × 4 = 72CH
18 × 4 = 72CH
72CH represents the theoretical number of color channels when 18 RGBW pixels are mapped independently; it does not mean that the standard RGB version already supports the 72CH mode.
5. Power Calculation and Engineering Verification
Nominal power of a single LED in the original data: 3W
Number of LEDs in the original data: 18
Theoretical light source power: 18 × 3W = 54W
The 500mm version has a rated total power of 60W.
The nominal total power of the 1000mm version is 120W.
The aforementioned parameters are derived from different configuration specifications and cannot be directly equated to the same light source assembly.
During equipment selection, the actual number of light sources, pixel grouping configuration, driver power, and the overall luminaire input power should be confirmed separately.
IV. Ten Key Advantages of This Product
1. High power RGB full color lighting
It employs high-power RGB LED light sources that can mix light through red, green, and blue channels to achieve a variety of architectural lighting colors and dynamic effects.
Suitable for architectural exterior walls, commercial landscapes, and professional stage lighting projects.
2. Professional DMX512 digital control
Supports the DMX512 lighting control protocol and can be programmed via compatible lighting consoles, network DMX gateways, and professional control software.
Suitable for multi-luminaire coordination and large-scale lighting projects.
3. Multiple DMX channel modes
According to the original documentation, the product supports multiple DMX channel configurations.
Depending on the specific driver board and control mode, it can support overall control, segmented control, or independent pixel control.
The specific channel functions shall be subject to the official DMX channel table.
4. 60 ° nominal beam angle
The product features a 60° nominal beam angle, making it ideal for illuminating building facades, walls, and landscape structures.
The actual illuminated width, luminance distribution, and uniformity are influenced by the mounting distance, luminaire spacing, and optical configuration.
5. IP66 outdoor protection
The IP66 protection rating is suitable for outdoor lighting applications that require dustproof, rainproof, and resistance to powerful water jets.
During installation, ensure that the connectors, end caps, power wiring, and the overall luminaire sealing structure meet the required protection standards.
6. AC100-240V wide voltage input
Supports AC 100–240 V, 50–60Hz input, facilitating power supply configurations across different regions.
Actual wiring and protective measures shall comply with local electrical installation codes.
7. RGBW Custom Extension
Standard products use an RGB full-color light source.
Based on project requirements, a customized RGBW four-color lighting solution can be evaluated, with the addition of an independent white-light channel.
Specifically, the white light color temperature, power, and control channels shall be subject to the specifications of the customized version.
8. Multiple operating modes
Depending on the control panel configuration, it supports DMX512, master‑slave, standalone, and sound‑activated operation modes.
Suitable for engineering projects of varying scales and control requirements.
9. Multi-lamp coordinated control
Using the DMX512 system, multiple wall-washer lights can be centrally dimmed, have their colors changed, and be controlled with dynamic lighting effects.
Large-scale projects can be configured for zone-based control by integrating with Art-Net networks and multi-channel DMX output gateways.
10. Engineering customization ability
The luminaire length, color configuration, optical angle, control method, connection structure, and mounting accessories can be evaluated based on project requirements.
Suitable for architectural lighting, cultural and tourism night tours, and professional stage lighting projects.
5. DMX512 Intelligent Control System
1. DMX512 control principle
DMX512 is a professional protocol for controlling stage and architectural lighting.
The luminaire receives control data via the DMX signal and adjusts the LED color, brightness, and dynamic effects according to the configured DMX start address and channel mode.
Multiple luminaires can be assigned different addresses according to project requirements, enabling centralized control or grouped control.
2. DMX channel mode
The control modes listed in the original product documentation include:2CH 3CH 5CH 6CH 8CH 9CH 18CH 54CH 56CH
Different channel modes may correspond to overall dimming, RGB color control, macro effects, segmented control, or individual pixel control.
The specific functions of each mode must be confirmed according to the official DMX channel table.
3. 54-channel RGB independent pixel control
When all 18 RGB pixels support independent control:
18 Pixels × 3CH = 54CH
This mode can be used for RGB per-pixel color mapping, water effects, chasing sequences, and dynamic lighting animations.
4. 56-channel control mode
The raw data includes a 56-channel mode.
This mode may configure additional function channels beyond the 54 RGB color channels, but the specific purpose of these extra channels cannot be directly confirmed at this time.
Refer to the 56-channel table of the actual driver board.
5. Art-Net Network Extension
This product uses DMX512 signal input.
To connect to an Art-Net network, you can use a compatible Art-Net-to-DMX gateway to convert network control data into DMX512 signals.
Typical connection:
Professional lighting software → Art-Net network → Art-Net to DMX gateway → DMX512 pixel wash lights
Art-Net is an upper-layer network control protocol, and the DMX interface of this luminaire should not be described as a native Art-Net interface.
6. MADRIX Control
MADRIX can be used for digital lighting effects programming, pixel mapping, and dynamic control of multiple fixtures.
By using an Art-Net-to-DMX gateway, the data output by MADRIX can be sent to wall-washing lights.
In the 54-channel independent RGB pixel mode, the color mapping can be configured according to the actual pixel sequence.
7. TouchDesigner Interactive Control
TouchDesigner can integrate cameras, sensors, audio analysis, and real-time visual content generation to produce lighting control data.
The product can be integrated via compatible Art-Net or DMX output systems.
Suitable for interactive architectural facades, commercial art installations, and digital light-and-shadow projects.
8. MA Lighting professional lighting console
It can be integrated into the MA Lighting control system via a compatible DMX512 output device or an Art-Net-to-DMX gateway.
Suitable for performances, commercial events, and large-scale lighting projects.
9. Avolites professional console
The luminaires can be controlled via DMX512 or a compatible networked DMX gateway, based on the console’s actual output capability.
10. DMX Address and System Capacity
A single DMX512 standard data frame can provide up to 512 control channels.
If each luminaire uses 54 channels:
512 ÷ 54=9 complete lighting fixtures
Therefore, without considering the occupancy of other channels, a single DMX data domain can theoretically accommodate independent channel assignments for up to nine 54-channel lighting fixtures.
9 × 54 = 486CH
Remaining channels: 26CH
Only the channel capacity is calculated here; this does not mean that a single DMX physical line can connect nine or more devices under all circumstances.
The actual number of devices also needs to take into account the transceiver load, cable length, splitters, and signal quality.
6. AOSHOW supporting control system
1. Art-Net to DMX control gateway
It can receive Art-Net data from MADRIX, TouchDesigner, and other professional lighting systems, and convert it into DMX512 output.
Suitable for centralized control of multiple RGB wall washer lights.
2. DMX512 Professional Lighting Console
The luminaires can be controlled via a DMX512-compatible output interface.
Suitable for architectural lighting, stage performances, and commercial events.
3. Network Switches and Multi-Gateway Systems
Large-scale projects can connect multiple Art-Net-to-DMX gateways via a network switch to allocate different lighting zones.
Suitable for building facades, urban nightscapes, and large-scale cultural and tourism lighting projects.
4. MADRIX pixel mapping system
RGB pixel mapping can be established based on the luminaire’s actual channel table, enabling dynamic color and lighting effect programming.
5. TouchDesigner Interactive System
Control signals can be generated in real time to enable music interaction, sensor integration, and artistic lighting control.
6. AOSHOW Controller Compatibility Information
AOSHOW offers a wide range of Art-Net, SPI, and DMX control devices.
This product uses DMX512 input; therefore, the accompanying control equipment must have a compatible DMX512 output capability.
You cannot assume that a controller capable of supporting SPI pixel lights can directly connect to this DMX512 wall washer light.
7. system connection mode
1. Direct control via DMX console
DMX512 console → DMX signal cable → AS-PWW RGB pixel wall washer light
2. MADRIX real-time control
MADRIX computer → Art-Net network → Art-Net to DMX gateway → AS-PWW RGB pixel wall washer lights
3. TouchDesigner interaction control
TouchDesigner → Art-Net network → DMX-compatible gateway → AS-PWW RGB pixel wall washer light
4. MA Lighting Control
MA Lighting console → DMX512 output or compatible network DMX gateway → AS-PWW RGB pixel wall washer light
5. Large-scale architectural lighting projects
Professional lighting control server → Network switch → Multiple Art-Net to DMX gateways → Multiple AS-PWW RGB pixel wall wash lights
6. Power Connection
AC 100–240V power supply → Compliant electrical protection and distribution system → Lighting fixture power input interface
The power connection and the DMX signal connection of the luminaire shall be made separately in accordance with the official wiring diagram.
8. Installation Method and Engineering Application
1. Building facade installation
It can be securely mounted to building exterior walls, curtain wall structures, or other installation locations that meet the load-bearing requirements by using a compatible mounting bracket.
2. Stent angle adjustment
Depending on the actual support structure, the projection direction of the luminaire can be adjusted during installation.
The actual adjustable angle is subject to the accompanying mounting accessories.
3. Linear arrangement of multiple luminaires
Multiple wall washer lights can be arranged in a continuous line along building facades, walls, or landscape structures to create a linear lighting effect.
4. DMX Signal Connection
Connect the DMX signal cable according to the actual interface definition of the luminaire, and set the corresponding DMX start address.
Long-distance lines should be equipped with distributors and terminal matching in accordance with the system design.
5. Outdoor waterproof installation
IP66 protection not only applies to the luminaire housing but also requires that the end caps, connectors, power wiring, and on-site installation points maintain full protection.
6. Power Supply and Wiring Configuration
The distribution capacity shall be calculated based on the actual input power of the luminaires, the number of fixtures installed, the cable length, and the power supply conditions.
The number of luminaires that may be continuously connected shall not be determined solely based on the connector’s physical configuration.
7. Cooling Requirements
High-power LED wall washers should be installed with adequate clearance to ensure proper heat dissipation.
It must not be installed for extended periods in enclosed or high-temperature environments that do not meet the product’s cooling requirements.
8. Installation and Commissioning
Before formal operation, verify the luminaire power supply, DMX address, channel mode, signal connections, and control system settings.
9. typical application scenarios
1. Building facade lighting
Suitable for commercial buildings, office buildings, hotels, urban landmarks, and architectural facades.
It can achieve full-color RGB wall washing, dynamic gradient effects, and zone-based lighting.
2. City night lighting
Suitable for urban public spaces, landscape architecture, commercial districts, and nighttime lighting projects.
3. Cultural and Tourism Night Tour Project
Suitable for scenic-area buildings, themed districts, cultural tourism settings, and nighttime light-and-shadow performance projects.
4. Commercial Complex
Suitable for shopping malls, commercial streets, branded buildings, and large-scale commercial event spaces.
5. Hotel facade lighting
Suitable for hotel building facades, entrance landscapes, and outdoor decorative lighting.
6. Stage Design and Stagecraft
Suitable for stage backdrops, concert visual designs, and professional performance lighting setups.
7. Immersive Digital Art
Through a compatible control system, TouchDesigner can be integrated with real-time data to generate dynamic lighting effects.
8. Bridges and Landscape Structures
It can be used for landscape structures, bridge-mounted landscaping, and urban artistic lighting, depending on the actual installation configuration and protection requirements.
10. Installation and Use Precautions
The product operates on an AC 100–240V input and must be installed by a qualified, licensed electrician.
Before wiring, verify that the luminaire’s nameplate voltage matches the on-site power supply conditions.
Configure protective grounding, circuit protection, and necessary residual-current protection measures in accordance with local electrical codes.
DMX signal connections should use appropriate cables, and the connector pinout must be verified.
When installing multiple luminaires, the DMX start address and channel mode should be set correctly.
Different modes, such as 54CH and 56CH, cannot directly share the same channel mapping configuration.
When installing outdoors, ensure that the connectors, end caps, and power wiring points are fully protected.
IP66 does not mean the luminaire can be used submerged in water for extended periods.
Do not exceed the rated current-carrying capacity of the connector and power cord.
High-power LED luminaires shall meet thermal management requirements and ensure that the heat dissipation paths remain unobstructed.
The installation of building exterior walls shall employ supports and fixing structures that meet the load-bearing requirements.
Before performing maintenance, disassembly, or electrical inspections, the power supply must be disconnected.
Actual installation shall comply with local building, electrical, and high-altitude work safety codes.
Large-scale projects should complete sample luminaire testing and control system compatibility verification before formal installation.
Eleven, OEM / ODM product customization services
AOSHOW offers custom services for LED pixel wall washers and professional intelligent lighting control systems.
Product length: 500mm / 1000 mm, with other engineering specifications subject to evaluation.
LED color: RGB/RGBW
LED light source configuration: assessed based on project requirements.
Beam angle: To be evaluated based on the optical design.
Pixel count: Evaluated based on the driver board and structural design.
Pixel grouping: Designed according to control requirements.
Control protocol: DMX512
Control channel: Configured according to the actual driver board settings.
Protection rating: IP66
Signal Connection: DMX512 Signal Interface
Power connection: Configure according to the rated power and engineering conditions.
Installation structure: Building-mounted fixed brackets and custom installation accessories.
Art-Net control system: supporting supporting scheme design
MADRIX pixel mapping: supports project control scheme design
TouchDesigner Interactive Control: Supports System Integration Solution Design
Application areas: architectural lighting, cultural and tourism night tours, commercial landscapes, stage design, and digital art installations.
The specific customization details must be confirmed in conjunction with optical, electrical, thermal management, protection, and engineering requirements.
XII. FAQ
Q1: What is the AS-PWW-RGB18P-1000-DMX-IP66 product?
It is a 1000 mm–long, full‑color RGB LED pixel wall washer provided by AOSHOW, featuring DMX512 digital control and IP66 protection, suitable for architectural lighting, landscape illumination, and professional stage lighting projects.
Q2: What are the dimensions of this wall washer?
The nominal dimensions of the 1000mm version of the luminaire are 1000 × 88 × 135 mm. The series also offers a 500 × 88 × 135mm version.
Q3: What supply voltage does this product use?
It uses an AC 100–240 V, 50–60Hz power input.
Q4: What is the product’s protection rating?
The nominal protection rating is IP66, suitable for outdoor installation environments that meet this protection rating requirement. During actual installation, it is still necessary to ensure the integrity of wiring and connector protection.
Q5: How many independent pixels does the product have?
The standard model includes an 18P pixel marker, and the original data lists 18 pixels. The actual independent control capability must be confirmed based on the driver board and DMX channel mode.
Q6: How many DMX channels are required for 18 RGB pixels?
If all 18 RGB pixels can be controlled independently, with 3 channels per pixel, then 54 color control channels are required.
Q7: What DMX channel modes does the product support?
The original data lists the 2CH, 3CH, 5CH, 6CH, 8CH, 9CH, 18CH, 54CH, and 56CH modes. The specific channel functions shall be subject to the official channel list.
Q8: Does the product support MADRIX?
RGB lighting programming and pixel mapping can be achieved by integrating MADRIX with a compatible Art-Net-to-DMX gateway.
Q9: Does the product support TouchDesigner?
It can be integrated with TouchDesigner via compatible Art-Net or DMX output systems to achieve real-time interactivity and digital lighting effects.
Q10: What is the power rating of this wall washer light?
The official website’s original specifications list 60W for the 500mm version and 120W for the 1000mm version. Due to configuration differences in the raw data regarding LED quantity and individual power ratings, the official engineering selection shall be based on the nameplate of the corresponding model and the measured power.
Q11: Does the product support RGBW?
The standard model is the RGB version; an RGBW customized solution can be evaluated based on project requirements.
Q12: Does the product support voice control?
The original documentation lists a voice-controlled operating mode; whether it is actually available and how it functions should be confirmed based on the control board and firmware configuration.
Q13: Can it be used on exterior building walls?
Sure. The product is designed for architectural façade and outdoor landscape lighting projects; however, selection should be based on the actual building structure, power supply conditions, optical requirements, and installation environment.
Q14: Can multiple wall washer lights be connected together?
Multiple luminaires can be linked and controlled via the DMX control system and power distribution scheme. The specific number of signal connections and power connections shall be calculated separately based on the equipment specifications.
Q15: Does AOSHOW offer engineering customization?
We support custom solutions for RGBW color, luminaire length, beam angle, pixel control, mounting brackets, and lighting control systems, tailored to project requirements.
13、 AOSHOW Brand and Manufacturer Introduction
Shenzhen AOSHOW Optoelectronics Technology Co., Ltd. (AOSHOW), established in 2016 and headquartered in Shenzhen, China, is a leading LED lighting manufacturer integrating R&D, production, international trade, and engineering applications of innovative LED lighting solutions.
The company’s main products include LED full-color pixel wall washers, LED point light sources, LED digital pixel strips, 3D立体 matrix lights, 360° luminous pixel tubes, flexible LED neon tubes, DMX512 control equipment, and the Art-Net intelligent lighting control system.
The products are used in architectural lighting, urban nightscapes, cultural and tourism nighttime tours, stage design, bars and nightclubs, commercial spaces, and immersive digital art installations.
AOSHOW is dedicated to integrating LED digital pixel technology and professional lighting control with creative artistic design, providing global lighting designers, contractors, system integrators, and digital art creators with professional LED lighting products and customized solutions.
Brand concept: light and shadow as the media, quality as the basis
Product philosophy: Let every beam of light become an artistic expression of space.
Official website:https://www.aoshowai.com/
