AOSHOW | D 22 360 ° LED Pixel Flexible Neon Tube
English name: D22 360 ° RGB Flexible LED Pixel Neon Tube
Product brand: AOSHOW
Manufacturer: Shenzhen AOSHOW Optoelectronic Technology Co., Ltd
5-meter product model: AS-D22-360RGB40P-5000-24V-IP66
10-meter product model: AS-D22-360RGB40P-10000-24V-IP66
Product Type: 360° Omnidirectional RGB Digital Programmable Flexible Neon Light Tube
Key features: 360° omnidirectional light emission | Ø22mm flexible light tube | 240 LEDs/m | 40 pixels/m | P25 pixel pitch | SPI independent pixel control | DC24V | ≤18W/m | IP66 protection | standard rolls of 5 meters/10 meters
1. Product Overview
AOSHOWD 22 360 LED pixel flexible neon tube is a professional creative LED lamp integrating 360 omni-directional luminescence, flexible bending, RGB full-color pixel control and digital artistic expression. It is specially designed for stage, bar nightclub, music festival, architectural art lighting, cultural tour night tour and immersive interactive light and shadow device.
The product uses a flexible circular silicone lamp body with a diameter of 22mm, with high-density RGB LED light source and 360 omnidirectional diffusion light-emitting structure to achieve a surrounding dynamic lighting effect. Compared with the traditional single-sided LED light bar, the light change can be viewed from multiple directions, suitable for hoisting, curve, wave, spiral, ring and large three-dimensional art modeling.
Each meter of the light tube is equipped with 240 LED beads and 40 independently controllable pixels. Every six LEDs form a pixel unit, with a pixel pitch of 25 mm, or P25. Controlled via an SPI (TTL) digital interface, and with 8-bit grayscale support for each RGB color channel, the system can reproduce approximately 16.7 million theoretical color combinations, enabling rainbow gradients, chasing water effects, dynamic light waves, pixel strobing, particle animations, and a variety of creative visual effects.
The product adopts DC24V power supply, the rated power does not exceed 18 W/m, and provides 5 m and 10 m standard package specifications. The flexible silicone outer cover has good bending adaptability, and with IP66 protection design, it can meet the needs of indoor and outdoor lighting projects that meet the use conditions.
When paired with the AOSHOW-compatible Art-Net to SPI smart controller, it can achieve pixel mapping, music synchronization, real-time animation, and interactive lighting control through professional software such as MADRIX, TouchDesigner, and Resolume.
The D22 flexible neon tube combines flexible shaping, 360° omnidirectional illumination, and independent RGB pixel control. It can be used to create single dynamic light strips, or multiple tubes can be assembled into two-dimensional light arrays and three-dimensional spatial art installations.
2. product technical specifications
1. Basic product parameters
| Parameter name | Technical Specifications |
|---|---|
| Product brand | AOSHOW |
| Manufacturer | Shenzhen AOSHOW Optoelectronic Technology Co., Ltd |
| Product Name | D22 360° LED Pixel Flexible Neon Tube |
| English name | D22 360° RGB Flexible LED Pixel Neon Tube |
| 5-meter model | AS-D22-360RGB40P-5000-24V-IP66 |
| 10-meter model | AS-D22-360RGB40P-10000-24V-IP66 |
| Product type | Digitally programmable RGB omnidirectional flexible neon light tube |
| Lamp tube diameter | Ø22mm |
| Luminous angle | 360° omnidirectional illumination |
| LED color | RGB full color |
| Number of colors | Approximately 16.7 million colors (8-bit RGB) |
| Number of LEDs | 240 LEDs/m |
| Pixel density | 40 Pixels/m |
| Pixel grouping | 6 LEDs/Pixel |
| pixel pitch | 25mm（P25） |
| Control method | SPI (TTL) digital signal |
| Network control | Achieve through compatible Art-Net to SPI controller |
| Operating voltage | DC24V |
| Rated power | ≤18W/m (full white, full brightness) |
| Theoretical maximum current | ≤0.75 A/m |
| Standard length | 5m/roll, 10m/roll |
| Lamp body material | Flexible silicone |
| Lamp body color | Black/White |
| Protection level | IP66 |
| Operating temperature | -20℃～+50℃ |
| Installation method | Lifting and hoisting, buckle fastening, flexible shaping installation |
| Control Software | MADRIX / Touch Designer / Resolume |
| Authentication | CE / RoHS (subject to the valid documentation for the corresponding model) |
| Customized services | OEM / ODM customization |
2. LED Light Source and Pixel Parameters
| Parameter name | Technical Specifications |
|---|---|
| LED light source type | RGB full-color LED |
| Number of LEDs | 240 beads/meter |
| Pixel density | 40 Pixels/m |
| Number of LEDs per pixel | 6 pieces |
| pixel center spacing | 25mm |
| RGB color channels | 3CH/Pixel |
| RGB logical channels per meter | 120CH |
| 5 m RGB logic channels | 600CH |
| 10 m RGB logic channels | 1200CH |
| Number of colors | Approximately 16.7 million colors (8-bit RGB) |
| Driver IC | TM1903 |
| Signal Type | SPI（TTL） |
| light emitting structure | 360° circular flexible diffused illumination |
| Color Control | RGB independent pixel control |
3. Electrical parameters
| Parameter name | Technical Specifications |
|---|---|
| Input voltage | DC24V |
| Maximum nominal power per meter | ≤18W |
| Maximum theoretical current per meter | ≤0.75A |
| 5-meter maximum rated power | ≤90W |
| 5-meter maximum theoretical current | ≤3.75A |
| 10-meter maximum rated power | ≤180W |
| 10-meter maximum theoretical current | ≤7.5A |
| Power supply method | DC24V constant voltage power supply |
| Digital control signal | SPI（TTL） |
| Network Control Extension | Art-Net to SPI |
| long distance power supply | Replenish power based on line voltage drop, connector rated current, and load configuration. |
| Power configuration | Select the model based on the actual total power and the engineering margin. |
4. Structural and Environmental Parameters
| Parameter name | Technical Specifications |
|---|---|
| Lamp outer diameter | Ø22mm |
| Lamp body material | Flexible silicone |
| Luminous angle | 360° |
| Standard roll length | 5m / 10m |
| Protection level | IP66 |
| Operating temperature | -20℃～+50℃ |
| Minimum bending radius | 120° |
| Allow bending direction | Subject to the formal installation requirements. |
| Installation method | Lifting and hoisting, buckle fastening, flexible shaping |
| End protection | It should be consistent with the overall luminaire protection requirements. |
| For outdoor use | Ensure that the connectors, end caps, and wiring sections are fully protected. |
| Customized services | OEM / ODM |
3. LED pixel count and power configuration
1. 1-meter specification
Lamp length: 1 m
Number of LEDs: 240
Number of pixels: 40 Pixels
RGB control channel: 120 Channels
Maximum rated power: 18W
Maximum theoretical current: 0.75A
2.5-meter standard roll packaging
Lamp length: 5 meters
Number of LEDs: 1200
Number of pixels: 200 Pixels
RGB control channel: 600 Channels
Maximum power rating: 90W
Maximum theoretical current: 3.75A
3. 10-meter standard roll packaging
Lamp length: 10 meters
Number of LEDs: 2400
Number of pixels: 400 Pixels
RGB control channel: 1200 Channels
Maximum power rating: 180W
Maximum theoretical current: 7.5A
4. Length and Pixel Power Conversion Table
| Technical parameters | 1 meter | 5 meters | 10 meters |
|---|---|---|---|
| Lamp length | 1m | 5m | 10m |
| Number of LEDs | 240 pieces | 1200 | 2,400 pieces |
| Independent pixel | 40 Pixels | 200 Pixels | 400 Pixels |
| RGB logic channels | 120CH | 600CH | 1200CH |
| Maximum rated power | ≤18W | ≤90W | ≤180W |
| Maximum theoretical current | ≤0.75A | ≤3.75A | ≤7.5A |
| Operating voltage | DC24V | DC24V | DC24V |
| Control method | SPI | SPI | SPI |
The above data are calculated according to 240 lamps/m, 40 pixels/m and 18 W/m. Actual input power, current, continuous power supply distance and brightness performance shall be subject to physical test.
The specifications are calculated based on a unit length of 1 meter, and the standard delivery lengths are 5 meters and 10 meters per roll.
5. Art-Net Universe Calculation
Each RGB pixel occupies three logic control channels.
A standard DMX universe contains 512 channels, capable of accommodating up to 170 full RGB pixels.
1-meter LED tube: 40 pixels, 120 channels.
5-meter light tube: 200 pixels, 600 channels.
10-meter light tube: 400 pixels, 1200 channels.
Based on full RGB pixel allocation per Universe, at least 2 Universes are required for 5 meters, and at least 3 Universes are required for 10 meters.
The actual Universe mapping method should be confirmed based on the controller firmware and port configuration.
IV. Ten Key Advantages of This Product
1. 360 omni-directional luminescence
The circular silica gel diffusion structure is used to realize the 360 ° omnidirectional light emission design, and the RGB dynamic change of the lamp can be viewed from different angles.
Particularly suitable for hanging, open and multi-angle viewing of light and shadow art installations.
The actual luminous uniformity depends on the lamp body structure, the diffusion material and the LED layout.
2. D22mm exquisite flexible structure
The diameter of the lamp tube is 22mm, and the flexible silicone outer cover is adopted, which takes into account the stereoscopic visual effect and flexible modeling ability of the circular lamp body.
According to the project design curve, wave, ring, spiral and a variety of space art modeling.
The actual minimum bending radius and allowable bending direction shall comply with the product installation requirements.
3. 240 LED high density arrangement
240 LED lamp beads per meter are configured, combined with silica gel diffusion structure, to enhance the intensity of light spots and linear luminous performance.
Suitable for close art installation, stage decoration and dynamic light and shadow design.
4. 40 pixels/meter independent control
Each meter contains 40 independently controlled pixels, each composed of 6 LEDs.
Using SPI digital control, each pixel color and brightness can be set independently, showing dynamic water, rainbow gradient, light wave chase, pixel strobe and a variety of creative lighting effects.
5. RGB about 16.7 million color full color display
Using RGB three-color light mixing technology, about 16.7 million theoretical colors can be combined under the condition of 256 gray level control for each color channel.
Provide lighting designers with a rich choice of color changes and dynamic effects.
6. DC24V low voltage power supply
The product adopts DC24V power supply design, the maximum nominal power does not exceed 18 W/m.
Suitable for engineering installation with professional LED power supply and control system.
For long distance use, power supply shall be planned according to power, line voltage drop and rated current of connector.
7. IP66 waterproof and dustproof design
Provide IP66 protection level, suitable for indoor and outdoor lighting projects that meet the installation conditions.
IP66 does not mean that it can be used in water for a long time. When installing, it should ensure that the end of the lamp body, the connector and the wiring part meet the corresponding protection requirements.
8. Art-Net Intelligent Control Extension
Combined with the Art Net to SPI controller, it can be connected to a professional lighting control network.
Support MADRIX, TouchDesigner, Resolume and other compatible software, to achieve real-time pixel mapping, music linkage, lighting animation and interactive artistic effects.
9. 5 m and 10 m standard package
Provide 5 meters, 10 meters standard package specifications, convenient project selection, transportation and installation.
The appropriate length can be selected according to the modeling size, pixel requirements and power supply configuration of different projects.
10. Support creative art customization
According to the design requirements of stage, entertainment venues, architectural art and immersive devices, the length, control system, connection mode and supporting installation scheme can be customized.
5. Art-Net / SPI Intelligent Control System
AOSHOWD 22 360 ° flexible neon tube is controlled by SPI(TTL) digital signal and can be connected to professional digital lighting system through compatible Art-Net to SPI controller.
Control signal: SPI(TTL)
Network Extension: Art-Net
Pixel density: 40 Pixels/m
Pixel grouping: 6 LEDs/Pixel
Color control: RGB full color
5 meters control channel: 600 Channels
10 meters control channel: 1200 Channels
Software support: MADRIX/TouchDesigner/Resolve
Effect type: water, gradient, chase, light wave, strobe, particle animation
Interactive expansion: music control, camera interaction, gesture control, human body sensing
Associated Equipment: Art-Net to SPI Pixel Controller
1. SPI digital pixel control
40 independent pixels per meter, with each pixel containing 6 LEDs.
Through a compatible SPI controller, the RGB color and brightness of individual pixels can be set independently, enabling pixel-by-pixel scrolling, chasing, and dynamic visual effects.
The controller must match the communication timing, signal levels, and color sequence of the actual driver IC.
2. Art-Net Network Control
The Art-Net network is used to transmit lighting control data, which is then converted by an Art-Net-to-SPI controller and output to the D22 flexible neon tube.
Art-Net is not the SPI signal that the lighting fixture receives directly.
3. MADRIX pixel mapping
MADRIX can output RGB pixel data to compatible controllers via the Art-Net network.
Suitable for dynamic gradients, meteor chases, music synchronization, and large-scale pixel lighting installations.
4. TouchDesigner Real-Time Interaction
TouchDesigner can integrate camera input, gesture recognition, audio analysis, and sensor data to generate real-time visual effects.
By integrating with the control system, RGB data is mapped onto the D22 flexible neon tubing to create interactive artistic lighting.
5. Resolume performance visual synchronization
The show’s visual content can be synchronized with the D22 digital pixel lighting system through a compatible Art-Net/DMX output workflow.
6. System connection mode
Computer lighting software → Art-Net network → SPI pixel controller → D 22 360 ° RGB flexible neon tube
Independent power supply connection: DC 24V constant-voltage power supply → Power distribution and protection circuit → D22 flexible neon tube
The interactive function needs to be used with the corresponding software, sensors and control equipment.
The controller must match the actual driving chip, communication timing, logic level and pixel grouping mode of the lamp.
6. flexible shape and installation features
1. Free bending design
Using flexible silicone lamp body, curve and space modeling installation can be carried out according to the project design.
Suitable for creative structures such as waves, arcs, rings, and spirals.
2. 360 ° circular luminous structure
Different from the traditional planar light-emitting light bar, D22 adopts a circular light body, which can be used for a three-dimensional light device requiring multi-directional viewing.
3. Hoisting and fixed installation
Matching buckles, brackets, lifting accessories or custom mounting structures can be used according to the actual scene.
When hoisting, an independent safety bearing device should be configured to avoid the weight of the lamp body borne by the power line or signal line.
4. 5 m and 10 m package
Standard length can meet the needs of different space lighting modeling.
During installation, the signal input position, power supply mode and bending path of the lamp tube shall be reasonably planned.
5. Modular system connection
Support with multi-channel SPI pixel control system to facilitate centralized control of multiple light areas.
6. Easy installation and maintenance
The flexible lamp body structure is adopted, which is convenient for on-site modeling adjustment.
The power supply must be disconnected before maintenance and connection operations to avoid damage to equipment during live operations.
7. typical application scenarios
1. Stage and Concert
Suitable for concerts, music festivals, DJ stage, performance lighting background and large creative art installations.
Through 360 ° omnidirectional light emission and RGB independent pixel control, dynamic light wave, water chasing and music linkage effect are realized.
2. Bars, nightclubs and KTV
Suitable for bar ceiling, DJ station, nightclub space, wall decoration and immersive entertainment device.
Synchronize music rhythm through professional lighting software to create a rich dynamic visual experience.
3. Immersive digital art installation
Combine TouchDesigner, cameras, gesture recognition and other interactive systems to achieve real-time responsive digital light and shadow works.
Suitable for digital art exhibitions, interactive experience halls and immersive commercial spaces.
4. Creative architectural lighting
It is suitable for building facades, line art, curve structure, space decoration and outdoor projects that meet the conditions of use of IP66.
Display a variety of creative lighting effects through RGB dynamic control.
5. Cultural Travel Night Tour and Theme Light and Shadow
It is suitable for theme exhibition hall, landscape art, light and shadow exhibition, cultural tourism project and creative installation.
Can create flowing light belt, ring light and shadow and customized dynamic artistic modeling.
6. Commercial exhibition and retail space
It is suitable for the atrium of shopping malls, brand exhibition halls, commercial windows, product launches and creative art spaces.
Enhance the visual appeal of commercial spaces with flexible styling and digital pixel effects.
7. Three-dimensional lighting device
A plurality of D22 flexible tubes are arranged according to XYZ spatial structure, which can form curve matrix, spiral device and space art modeling.
Suitable for lighting designers, dance engineers and digital art creators.
Precautions for 8. installation and power supply
The input voltage of the product is DC24V, and direct access to AC mains is prohibited.
The power capacity should be calculated according to the actual installation length and load, and a reasonable design margin should be reserved.
The maximum rated power of the 5-meter tube is 90 W, and that of the 10-meter tube is 180 W.
A 10-meter package does not mean that a single-end full-on power supply can be supplied under all working conditions. It is necessary to verify the voltage drop and power supply scheme.
An SPI pixel controller compatible with the actual driver chip must be used.
The installation shall be carried out in accordance with the specified bending radius and shall not be forced to stretch, twist or bend.
It is forbidden to cut the lamp arbitrarily, unless the specific type clearly stipulates the position and end sealing method that can be cut.
During outdoor installation, the IP protection of connectors, end caps and wiring parts must be complete.
Reliable load-bearing structure and safety protection measures are required for large-scale hoisting.
Regularly check the power supply, controller, wiring and lamp body status to ensure stable operation of the system.
9. OEM / ODM customized service
AOSHOW supports customization of D 22 360 ° flexible neon tube and supporting intelligent control system.
Lamp length: 5 m/10 m and customized specifications
Lamp body size: D22mm and other feasible sizes
LED density and pixel count: to be evaluated according to the project’s technical requirements.
RGB dynamic control solution: SPI digital pixel control
Silicone jacket color and diffusion effect: Customized according to the actual product structure.
Cable length and connector type: configured according to project wiring requirements.
Art-Net / SPI intelligent control system: Select according to the driver IC and pixel count.
MADRIX pixel mapping solution: supports integration with compatible control systems.
TouchDesigner real-time interactive solution: supports external sensors and real-time data integration.
Stage lighting system for stage design: provides pixel-based luminaires and integrated control solutions.
Creative lighting solutions for bars and nightclubs: offering dynamic lighting synchronized with music.
Cultural and tourism night tours and art installation solutions: configured according to the installation environment and project requirements.
The specific customization scope, delivery specifications, and technical parameters shall be subject to the final confirmed product documentation and order.
10. AOSHOW brand introduction
Shenzhen AOSHOW Photoelectric Technology Co., Ltd. (AOSHOW) was founded in 2016, located in Shenzhen, China, is a collection of creative LED lighting research and development, manufacturing, intelligent control and engineering and technical services in one of the source of LED lighting manufacturers.
The company mainly deals with 3D three-dimensional matrix lights, 360-degree luminous neon tubes, LED full-color pixel lights, flexible digital light bars, Art-Net controllers and interactive art lighting systems.
Products are widely used in stage, bar nightclub, cultural travel night tour, commercial exhibition hall, architectural lighting and immersive digital art space.
AOSHOW is committed to combining digital pixel technology, creative lighting design and intelligent control to provide professional LED lighting products and customized solutions for global lighting designers, engineers, system integrators and digital art creators.
AOSHOW | 360 ° light and shadow creativity makes every space glow with infinite possibilities.
Official website:https://www.aoshowai.com/
11. FAQ
Q1: What is the D22 360° LED pixel flexible neon tube?
AOSHOWD22 is a 22mm-diameter RGB digital pixel flexible neon tube featuring a 360° omnidirectional light-emitting design. It features 240 LEDs per meter and 40 independent pixels, supports SPI digital control, and is ideal for stage lighting, bars, cultural tourism, and artistic lighting installations.
Q2: How many LEDs and how many pixels are there per meter in the D22 flexible neon tube?
Each meter is equipped with 240 LEDs and 40 independent RGB pixels, with every six LEDs forming a single pixel and a pixel pitch of 25 mm.
Q3: What voltage and power does the D22 flexible neon tube use?
It operates on a DC 24V power supply, with a maximum rated power of no more than 18W per meter. 5 meters not exceeding 90W, 10 meters not exceeding 180W.
Q4: Does the D22 flexible neon tube support MADRIX?
MADRIX can be connected via a compatible Art-Net-to-SPI controller to achieve RGB pixel mapping, gradients, chasing effects, and music synchronization.
Q5: Can the D22 flexible neon tube be connected to TouchDesigner?
Sure. TouchDesigner can output RGB pixel data through its control system compatibility, enabling real-time animation, music analysis, and sensor-based interactive effects.
Q6: Does the D22 flexible neon tube support direct DMX512 control?
The standard control method provided by this product is SPI (TTL). If you need to connect to a DMX512 system, you should use a control device that can convert the corresponding control signals into an SPI-compatible protocol for the light fixture; it should not be treated as a native DMX512 luminaire.
Q7: Can the D22 flexible neon tube be used outdoors?
The product is rated IP66 and suitable for outdoor applications where installation conditions are met; however, the end caps, connectors, and wiring points must also meet the corresponding protection requirements. It is not intended for prolonged submersion in water.
Q8: Can a 10-meter D22 flexible neon tube be powered from a single end?
You cannot make a judgment solely based on the 10-meter roll length. Whether segmented power replenishment is required should be determined based on the full-load current, line voltage drop, connector rated current, and power supply circuit design.
Q9: Can the D22 flexible neon tube be shaped into circles and spirals?
It features a flexible silicone structure and can be used to create curved, ring-shaped, wavy, and spiral designs, but must adhere to the bending radius and direction specified for the particular product.
Q10: Can the D22 flexible neon tube be used to create 3D立体 lighting installations?
It can be spatially arranged using multiple light tubes and a custom mounting structure, and paired with professional pixel-mapping software to create three-dimensional light-wave, chasing, and interactive lighting effects.
Q11: What are the standard lengths of the D22 flexible neon tube?
Available in standard roll lengths of 5 meters and 10 meters. Other lengths and cutting methods shall be determined based on the actual product structure and the manufacturer’s technical confirmation.
Q12: Can AOSHOW provide controllers and customized solutions?
AOSHOW can, based on the project’s pixel count, driver IC requirements, power load, and control software specifications, offer optional Art-Net SPI controllers, pixel mapping, and OEM/ODM engineering support solutions.
