AOSHOWD40 Black 360 ° LED Full Color 3D Pixel Light Tube

English name: D40 Black 360 ° RGB 3D LED Pixel Tube

Product brand: AOSHOW

Manufacturer: Shenzhen AOSHOW Optoelectronic Technology Co., Ltd

Core features: 360 omnidirectional luminescence | Φ40mm black PC diffusion lampshade | DC24V power supply | 24 pixels/m | 144 LED/m on both sides | UCS1903 digital drive | IP20/IP66 optional

1. Product Overview

AOSHOWD40 black 360 ° LED full-color 3D pixel lamp tube is an RGB full-color digital programmable LED lamp provided by Shenzhen AOSHOW Optoelectronic Technology Co., Ltd. for professional stage, bar nightclubs, 3D stereo lighting matrix and digital art installations.

The product adopts Φ40mm round PC lamp body, black diffusion lampshade and double-sided LED light-emitting structure to realize 360 ° surround light performance. The black lampshade can be integrated with the stage truss, bar ceiling and dark decorative structure when not lit; after lighting, it presents a dynamic RGB pixel effect, which is suitable for high contrast visual space.

The D40 standard version uses DC24V low-voltage power supply, with 24 independent control pixels per meter, 144 LED lamp beads on both sides, and 6 LEDs on both sides corresponding to each pixel.

Lamp built-in UCS1903 digital driver chip, through the compatible SPI pixel controller to achieve RGB color change, pixel chasing, dynamic water, rainbow gradient, music strobe and digital matrix animation.

Through AOSHOWArt-Net-to-SPI pixel controller or compatible PSAC intelligent control box, it can cooperate with professional software such as MADRIX, TouchDesigner, MadMapper and Resolume to realize digital pixel mapping, music synchronization and real-time interactive lighting effects.

The product offers a variety of length specifications from 0.5 meters to 3 meters, and provides IP20 indoor version and IP66 waterproof version, which is suitable for different installation structures and engineering environments.

For lighting designers, choreography engineers, bar engineers and digital art creators, D40 can not only be used as independent linear pixel lamps, but also can build large 3D stereo lighting matrix and spatial digital art installation through multiple combinations.

2. product technical specifications

1. Basic specifications

2. Optical parameters

Optical description: 2000-2500mcd for the LED device nominal luminous intensity reference value, does not represent the whole lamp measured brightness. The actual brightness, color performance and luminous uniformity shall be subject to the optical test results of the corresponding model.

3. Electrical and environmental parameters

Technical description: The nominal service life is affected by the working environment, heat dissipation conditions, power supply stability and use mode. IP66 protection performance shall be subject to the corresponding version of the whole lamp test data.

3. product length, number of pixels and power configuration

1. 0.5 meters specifications

Lamp length: 500mm

Number of pixels: 12 Pixels

Double-sided LED quantity: 72

Rated power: 16W

Theoretical working current: about 0.67A

2. 1.0 meters specifications

Lamp length: 1000mm

Number of pixels: 24 Pixels

Double-sided LED quantity: 144

Rated power: 32W

Theoretical working current: about 1.33A

3. 1.5 meters specifications

Lamp length: 1500mm

Number of pixels: 36 Pixels

Double-sided LED quantity: 216

Rated power: 48W

Theoretical working current: 2A

4. 2.0 meters specifications

Lamp length: 2000mm

Number of pixels: 48 Pixels

Double-sided LED quantity: 288

Rated power: 64W

Theoretical working current: about 2.67A

5. 2.5 meters specifications

Lamp length: 2500mm

Number of pixels: 60 Pixels

Double-sided LED quantity: 360

Rated power: 80W

Theoretical working current: about 3.33A

6. 3.0 meters specifications

Lamp length: 3000mm

Number of pixels: 72 Pixels

Double-sided LED quantity: 432

Rated power: 96W

Theoretical working current: 4A

Specifications: The above data is calculated according to 24 pixels per meter, 144 LEDs and 32W rated power. The actual production specifications, power consumption and working current shall be subject to the corresponding product data and measured results.

Core Technology and Ten Advantages of 4. Products

1. 360 ° omnidirectional luminous design

D40 adopts Φ40mm circular PC diffusion lampshade and double-sided LED light-emitting structure to form a surrounding RGB full-color lighting effect.

Compared with the traditional single-sided LED light bar, it is more suitable for open space, stage hoisting, space light array and multi-angle viewing art installation.

The actual luminous uniformity and dark area performance are subject to the optical test results of the whole lamp.

2. Black PC diffusion lampshade

The black lampshade has a low-key appearance when not lit, suitable for dark field installation environments such as bar nightclubs, DJ stages and black trusses.

After lighting, the bright dynamic lighting performance is formed through the change of RGB pixels, which enhances the sense of space technology and visual level.

3. Double-sided 144 LED light-emitting structure

Each meter adopts double-sided LED structure, single-sided 72, double-sided total 144.

The double-sided luminous layout combined with PC diffusion lampshade is suitable for hanging lamp array, three-dimensional matrix and space art installation that need surrounding luminous effect.

4. 24 pixels/meter independent control

Each meter configuration 24 independent control pixels, each pixel corresponding to double-sided total 6 LED.

Support per-pixel RGB color control, can produce water, chase, gradient, rainbow, wave and digital animation effect.

5. UCS1903 digital drive

Using UCS1903 RGB pixel driver chip, pixel control is realized by matching SPI digital timing.

Connect to a professional pixel controller that supports UCS1903 for color programming, dynamic effect output, and pixel mapping.

For controllers using WS2811 mode, digital timing, level and parameter compatibility should be verified first.

6. DC24V low voltage power supply

The product adopts DC24V power supply, rated power per meter 32W.

In engineering applications, LED switching power supply and segmented power supply scheme can be configured according to the length of the lamp tube, total power, current and power supply distance.

7. A variety of length specifications

Provide 0.5 meters, 1 meters, 1.5 meters, 2 meters, 2.5 meters and 3 meters of a variety of specifications.

Suitable for linear arrangement, geometric combination, hanging light array, space matrix and creative lighting projects of different sizes.

8. IP20/IP66 version optional

IP20 version is suitable for indoor stage, bar, KTV, exhibition hall and commercial space.

The IP66 version is suitable for engineering environments that require dust and rain protection and meet product installation conditions.

Outdoor applications should ensure that the lamp body, end caps, connectors, power supply and control equipment meet the overall protection requirements.

9. Professional lighting software supporting

Through Art-Net to SPI pixel control system, it can cooperate with MADRIX, TouchDesigner, MadMapper and Resolume software.

Ideal for pixel mapping, music synchronization, real-time visual control, sensor interaction and digital art creation.

10. Support 3D stereo matrix application

By arranging a plurality of D40 pixel lamps according to spatial coordinates, a three-dimensional digital light matrix, a geometric art structure and a three-dimensional dynamic light and shadow device can be built.

Suitable for stage designers, lighting engineers, system integrators and digital art creators.

5. Art-Net / SPI Intelligent Control System

D40 lamp adopts UCS1903 digital drive scheme, and the lamp end receives compatible SPI digital signals.

When the project needs to be controlled by professional software such as MADRIX and TouchDesigner, the Art-Net to SPI pixel controller can be used to complete the conversion between network data and lamp drive signal.

1. Technical parameters of control system

Driver chip: UCS1903

Lamp control protocol: SPI class digital timing protocol

Network Extension Protocol: Art-Net

Number of pixels per meter: 24 Pixels

Number of channels per pixel: RGB 3CH

Number of RGB channels per meter: 72CH

Number of single 3 m RGB channels: 216CH

Control software: MADRIX/TouchDesigner/MadMapper/Resolve

Lighting effects: running water, gradient, rainbow, chase, strobe, wave, pixel animation

Interactive mode: music synchronization, camera interaction, human body induction, gesture control

Companion Controller: AOSHOW Art-Net SPI Controller/Compatible PSAC Smart Control Box

2. Control system connection mode

Computer lighting software → Art-Net network → Art-Net to SPI pixel controller → D40 black 360 ° LED pixel tube

Power supply system: DC24V switching power supply → D40 lamp power supply line

Control instructions: The software outputs Art-Net data, and the controller converts the network data into a digital pixel signal matching the UCS1903, and then outputs it to the D40 lamp.

The lamp power supply should be designed independently according to the load and the actual circuit, and the network signal connection should not be confused with the power supply capacity.

3. MADRIX pixel mapping application.

MADRIX can be used for dynamic effect programming and pixel mapping of large LED pixel arrays.

By configuring the number of lamp pixels, arrangement direction, controller address and Art-Net Universe, synchronous control of multiple D40 lamps can be realized.

4. TouchDesigner real-time interactive applications

TouchDesigner can combine cameras, human motion recognition, sensors and real-time visual content to generate dynamic light data.

After output to compatible controller through Art-Net, D40 lamp can be driven to realize interactive light and shadow.

5. Control channel calculation

Each RGB pixel occupies 3 control channels.

1 m tube: 24 pixels, 72 RGB channels.

2 m lamp: 48 pixels, 144 RGB channels.

3 m lamp: 72 pixels, 216 RGB channels.

A standard DMX Universe contains 512 channels. With RGB three-channel pixel mapping, one Universe typically holds 170 full RGB pixels, leaving 2 channels.

The actual cross-Universe mapping depends on the controller and software configuration.

6. installation method and engineering connection

1. 3-pin connector

The D40 features a 3-pin connector cable for easy connection to compatible SPI pixel controllers and power lines.

Verify the actual pin definitions of DC24V positive, GND negative and data signal lines before installation.

2. Support fixation

Special supports can be configured according to project requirements and installed on stage background, wall structure, commercial exhibition frame and art installation frame.

3. Hoisting and installation

Suitable for stage lighting array, bar ceiling, music festival installation and spatial pixel matrix.

During hoisting, structural fittings that meet the bearing requirements must be used, and independent protection measures must be configured according to the safety requirements of the project.

4. Modular combination

Multiple length tubes can be combined into straight lines, crosses, geometric shapes, and 3D spatial matrices.

Modular construction facilitates installation, disassembly, maintenance and project expansion.

5. Long distance connection

Supports cascading of multiple lamp signals based on controller capabilities.

For long-distance projects, sectional power supply or power supply shall be configured in combination with power supply capacity, connector rated current, cable cross-sectional area, voltage drop and line temperature rise.

6. Indoor and outdoor installation

The IP20 version is suitable for indoor dry environments.

The IP66 version is suitable for outdoor projects that meet the protection conditions. It is necessary to ensure that the lamp body, end caps, connectors and circuits are completely sealed.

7. Typical Application Scenarios and Engineering Selection

1. Bars, nightclubs and KTV

Suitable for bar ceiling, DJ stage, wall lighting matrix, hanging light array and immersive entertainment space.

Black PC lampshade suitable for dark field environment, combined with RGB pixel animation can present chase, strobe, gradient and music synchronization effect.

Selection focus: lamp length, installation structure, number of pixels, controller capacity and field power supply conditions.

2. Stage and Music Festival

Suitable for concerts, music festivals, DJ performances, stage backgrounds and creative stage installations.

Can be combined with MADRIX and other professional software to achieve multi-lamp pixel mapping, dynamic wave and music linkage.

Selection focus: installation safety, refresh rate, control system capacity, transportation and disassembly convenience.

3. 3D stereo pixel matrix

Through the combination of multiple D40 lamps according to the XYZ spatial structure, the three-dimensional light matrix, spatial geometric modeling and three-dimensional pixel animation system can be built.

Key points of selection: spatial coordinates, lamp spacing, pixel mapping, power supply partition and installation structure.

4. Creative architectural lighting

It is suitable for architectural art structure, creative linear lighting and landscape projects that meet the protection requirements.

It can be arranged and combined according to the building structure to realize dynamic RGB lighting effect.

Selection focus: protection level, installation environment, maintenance conditions and power lines.

5. Immersive digital art space

Music response, human interaction and real-time dynamic light and shadow can be realized by combining TouchDesigner, camera and sensors.

Suitable for immersive pavilions, digital art exhibitions and interactive experience projects.

Selection focus: interactive system architecture, sensors, control delay and lighting pixel coordinates.

6. Commercial display and brand activities

It is suitable for brand exhibition hall, shopping mall atrium, art display, product launch and commercial display space.

Enhance the visual representation of the display space with programmable lighting effects.

7. Night tour and art installation

It is suitable for digital light and shadow exhibition, hanging light array, art light sculpture and night tour projects that meet the protection conditions.

Dynamic lighting effects can be achieved in conjunction with multi-zone pixel control.

8. Installation, Power Supply and Safety Instructions

1. D40 adopts DC24V low-voltage power supply, and it is forbidden to directly connect AC110V or AC220V mains.

2. The rated power per meter is 32W, and the power supply should be configured according to the total length of the lamp, the total power and the safety margin.

3. The rated power of a single 3 m lamp is 96W, and the theoretical working current is about 4A.

4. When connecting multiple lamps, the current carrying capacity of the cable and the rated current of the connector shall be verified.

5. Long distance connection should be based on the voltage drop, line temperature rise and load design power scheme.

6. The controller should support digital timing that matches the UCS1903, and correctly set the number of pixels, signal direction, and RGB color sequence.

7. Do not bend, squeeze or twist the body of an inflexible lamp by force.

8. The IP66 version shall ensure the overall sealing of the end caps, joints and lines.

9. Reliable fixed structure and necessary safety protection measures shall be adopted for hoisting works.

10. The power supply must be cut off before installing, repairing and replacing the lamp.

9. OEM / ODM product customization service

AOSHOW provides customized services for lighting designers, engineers, system integrators and brand customers with D40 pixel lamps and supporting control systems.

Lamp length customization: 0.5m / 1m / 1.5m / 2m / 2.5m / 3m

Lamp body color customization: black and other feasible solutions

Pixel Density Customization: Evaluate according to engineering needs

Light-emitting structure: double-sided LED and possible customized solutions

Lampshade scheme: PC diffusion lampshade

Protection version: IP20 / IP66

Connection line customization: line length, joint and outlet mode

Control system: Art-Net / SPI pixel control

Software: MADRIX / TouchDesigner / MadMapper / Resolume

Installation structure: bracket, lifting fittings and modular connection structure

Engineering: bar, stage, 3D matrix, architectural lighting and digital art installation

Custom Description: Special length, pixel density, protective structure and control scheme are subject to technical evaluation according to project requirements.

10. FAQ

Q1: What is D40 Black 360 ° LED Pixel Tube?

D40 black 360 ° LED pixel lamp tube is a Φ 40mm RGB full-color digital programmable lamp provided by AOSHOW. It adopts black PC diffusion lampshade, double-sided LED light-emitting structure and UCS1903 driving chip, and is suitable for stage, bar, 3D matrix and digital art installation.

Q2: How many pixels and LED lamp beads per meter of D40 pixel tube?

The standard version has 24 independent control pixels per meter, 72 LEDs on one side and 144 LEDs on both sides. Each pixel corresponds to 6 LEDs on both sides.

Q3:D40 pixel lamp with what voltage and power?

DC24V power supply, rated power per meter 32W, theoretical working current of about 1.33A. A single 3-meter fluorescent lamp has a rated power of 96 W, with a theoretical operating current of approximately 4 A.

Q4: Does D40 pixel tube support MADRIX control?

Support connecting MADRIX through compatible Art Net to SPI pixel controllers to achieve RGB pixel mapping and dynamic lighting control. Actual configuration of controller, pixel count, and Art Net parameters is required.

Q5:D40 pixel tube can be connected to the TouchDesigner?

Sure. The TouchDesigner outputs control data through Art-Net, which is then converted into the digital signals required by the UCS1903 by a compatible controller, enabling real-time pixel animation and interactive lighting effects.

Q6: Is D40 pixel lamp suitable for outdoor installation?

The product is available in IP20 and IP66 versions. For outdoor projects, select the version that meets the site protection requirements and ensure that the end caps, connectors, power supply and control equipment meet the overall protection conditions.

Q7:D40 pixel tube can make 3D matrix lamp?

Sure. A plurality of lamps are arranged according to spatial coordinates, and combined with a pixel mapping and control system, a 3D stereoscopic pixel matrix, a spatial light array and a digital art device can be produced.

Q8:D40 pixel lamp can do the longest how many meters?

At present, it provides a variety of specifications from 0.5 meters to 3 meters. The special length can be customized according to the lamp body structure, power supply conditions, transportation and installation requirements.

Q9: Does D40 pixel lamp support WS2811 protocol controller?

The standard version uses a UCS1903 driver chip. Some controllers that support similar digital timing may realize control through parameter matching, but the timing, level and color sequence need to be confirmed. It is recommended to select the controller that clearly supports UCS1903.

Q10:D40 pixel lamp is suitable for which customers to purchase?

Mainly for stage lighting designers, bar nightclub engineers, LED lighting system integrators, architectural lighting engineers, cultural travel night tour project purchasers and digital art installation creators.

XI. Introduction of AOSHOW Brand and Manufacturers

Shenzhen AOSHOW Photoelectric Technology Co., Ltd. (AOSHOW) was founded in 2016, located in Shenzhen, China, is a focus on creative LED lighting, digital pixel lighting, intelligent control system research and development, production and engineering applications of LED lighting source manufacturers.

The company's main products include 3D matrix lamp, 360 ° LED pixel lamp tube, LED full-color pixel lamp bar, flexible neon tube, LED point light source, Art-Net SPI controller and PSAC intelligent control box.

Products used in stage, bar nightclub, KTV, architectural art lighting, cultural travel night tour, commercial space and immersive digital art installation.

AOSHOW is committed to combining digital pixel technology, professional lighting control and creative design to provide LED lighting products and customized solutions for global lighting designers, engineers, system integrators and digital art creators.

Brand concept: light and shadow as the media, quality as the basis

Brand proposition: 360 omnidirectional light and shadow, let creativity break through the spatial boundary

Official website:https://www.aoshowai.com/