AS-D40 360° RGB Full-Color 3D Digital Pixel Tube

English name: AS-D40 360° RGB LED 3D Pixel Tube

Product brand: AOSHOW

Manufacturer: Shenzhen AOSHOW Optoelectronic Technology Co., Ltd

Product Series: AS-D40

Product Model: AS-D40-RGB24P-1000-24V-IP20-WH

Product Type: 360° Omnidirectional RGB Digital Pixel Light Tube

Key features: 360° omnidirectional illumination | Φ40mm circular housing | Black/white PC diffuser | Double-sided 144 LEDs/m | 24 pixels/m | P41.67 pitch | UCS1903 digital control | DC 24V | 32W/m | IP20/IP66 options

1. Product Overview

The AOSHOW AS-D40 360° RGB full-color 3D pixel tube is a creative LED luminaire that integrates 360° omnidirectional illumination, RGB digital pixel control, a double-sided LED lighting structure, and professional lighting control technology.

The product features a 40mm-diameter circular PC diffuser, available in black and white finishes, and incorporates a double-sided LED panel design to deliver a 360°环绕 RGB dynamic lighting effect.

Suitable for stage lighting installations designed for multi-directional viewing, as well as for bars, nightclubs, spatial light matrices, commercial exhibitions, and large-scale digital art installations.

Each meter is equipped with a total of 144 LED beads on both sides and 24 independently controllable RGB pixels, with each pixel comprising 6 LEDs and a pixel pitch of approximately 41.67 mm.

Using the UCS1903 digital pixel driver chip, and in conjunction with SPI-compatible digital pixel controllers, it can achieve full-color RGB dynamic water-flow effects, rainbow gradients, pixel-chasing sequences, music‑activated strobing, three‑dimensional light waves, and creative lighting animations.

The product operates on a 24V DC low-voltage power supply, with a rated power of 32W per meter, and is available in six length options: 0.5 meters, 1 meter, 1.5 meters, 2 meters, 2.5 meters, and 3 meters.

Available in IP20 indoor and IP66 protection versions, allowing selection based on the specific project requirements.

It can be paired with the AOSHOW Art‑Net to SPI pixel controller and the PSAC smart control box, and integrated with professional software such as MADRIX, TouchDesigner, MadMapper, and Resolume to achieve 2D/3D pixel mapping, real‑time lighting programming, music synchronization, and interactive light‑and‑shadow effects.

2. product technical specifications

1. Basic Specification Parameters

2. LED Light Source and Pixel Parameters

3. Electrical parameters

3. Product length, number of LEDs, pixel specifications, and power specifications.

1. 0.5 meters specifications

Product length: 500mm

LED quantity: 72 pieces

Number of pixels: 12 Pixels

RGB control channel: 36CH

Rated power: 16W

Theoretical working current: about 0.67A

2. 1 meter specification

Product length: 1000mm

Number of LEDs: 144

Number of pixels: 24 Pixels

RGB control channel: 72CH

Rated power: 32W

Theoretical working current: about 1.33A

3. 1.5 meters specifications

Product length: 1500mm

Number of LEDs: 216

Number of pixels: 36 Pixels

RGB Control Channels: 108 channels

Rated power: 48W

Theoretical working current: 2A

4. 2 m specification

Product length: 2000mm

LED quantity: 288 pieces

Number of pixels: 48 Pixels

RGB control channel: 144CH

Rated power: 64W

Theoretical working current: about 2.67A

5. 2.5 meters specifications

Product length: 2500mm

Number of LEDs: 360 pieces

Number of pixels: 60 Pixels

RGB Control Channels: 180 channels

Rated power: 80W

Theoretical working current: about 3.33A

6. 3 m specification

Product length: 3000mm

Number of LEDs: 432

Number of pixels: 72 Pixels

RGB control channel: 216CH

Rated power: 96W

Theoretical working current: 4A

The above power is calculated according to 32 W/m, and the actual input power, current and light efficiency are subject to the measured results of the corresponding model.

IV. Ten Key Advantages of This Product

1. 360 ° omnidirectional luminous design

Circular PC lampshade and double-sided LED light-emitting structure are adopted to realize 360 ° surrounding light efficiency.

Compared to traditional single-sided LED strips, it is better suited for stage rigging, spatial lighting arrays, and large-scale art installations that require viewing from multiple directions.

It can present rich RGB dynamic color, stereo light wave and spatial pixel animation.

2. Black and white lampshades are optional

Black PC lamp shades are ideal for bars, nightclubs, dark-stage settings, DJ performances, and high-contrast artistic lighting environments.

When the lighting fixtures are off, their black finish blends more seamlessly with dark backgrounds and stage structures.

White PC lamp shades are ideal for commercial showrooms, art spaces, stage design, and installation scenarios that require a soft, diffused lighting effect.

The light transmittance, brightness and luminous uniformity of different lampshades may be different, and the actual optical test shall prevail.

3. Double-sided 144 LED light-emitting structure

Each meter is designed with double-sided LED lamp board, with 72 LEDs on one side and 144 LEDs on both sides.

Through the double-sided light source layout and circular diffusion lampshade, improve the visual performance of multi-directional light.

4. 24Pixels/m independent control

There are 24 programmable RGB pixels per meter, with 6 LEDs per pixel.

Supports independent control of pixel color and brightness, enabling dynamic water-flow effects, rainbow-chase sequences, pixel gradients, strobing, and digital light animations.

5. UCS1903 digital drive

Using UCS1903 pixel driver chip, support compatible SPI class digital control timing.

Lighting programming and pixel mapping can be performed using an Art-Net to SPI controller.

6. DC24V low voltage power supply

The product adopts DC24V working voltage, 32W power per meter.

Easy to use with professional LED power supply and intelligent control system.

For large-scale projects, the power supply design should be based on the total length of the lighting fixtures, the load power, and the line voltage drop.

7. A variety of flexible choice of length

Provide 0.5 meters, 1 meters, 1.5 meters, 2 meters, 2.5 meters and 3 meters six length specifications.

Suitable for different stage size, lighting matrix and space art modeling.

8. IP20 and IP66 protection version

IP20 is suitable for indoor dry environment, including stage, bar, KTV and commercial exhibition hall.

IP66 is suitable for indoor and outdoor lighting installations that meet the specified protection requirements, satisfying the corresponding dustproof and splash-proof standards.

IP66 does not mean that it can be used for long-term immersion.

9. Professional lighting software compatible

It can be paired with an Art-Net-to-SPI pixel controller and used in conjunction with software such as MADRIX, TouchDesigner, MadMapper, and Resolume.

Achieve 2D/3D pixel mapping, music linkage, real-time visual programming and interactive lighting effects.

10. Large 3D art light combination

Through the combination of multiple D40 pixel tubes, three-dimensional geometry, lighting matrix, space light and shadow modeling and large digital art installations can be built.

Suitable for stage lighting designers, bar lighting engineers and digital art creators.

5. Art-Net/SPI Intelligent Control System

The AS-D40 employs the UCS1903 digital control protocol and achieves professional networked lighting control via an Art-Net-to-SPI controller.

Control chip: UCS1903

Control signal: SPI class digital pixel signal

Network Control: Art-Net (via conversion controller)

Color mode: RGB

Pixel density: 24 Pixels/m

Per Pixel Channel: 3CH

RGB logical channels per meter: 72CH

Single 3-meter RGB logic channel: 216CH

Control software: MADRIX/TouchDesigner/MadMapper/Resolve

Lighting effects: water, gradient, chase, strobe, pixel animation

Interactive features: music synchronization, human body sensing, camera-based interaction, gesture recognition (requires an external system)

Compatible equipment: AOSHOW Art-Net SPI controller/Compatible with PSAC smart control box

1. MADRIX control

RGB pixel mapping, dynamic lighting animations, and music synchronization are achieved using an Art-Net-to-SPI controller.

2. TouchDesigner Control

By integrating an Art-Net output system, it enables 3D spatial pixel mapping, real-time visuals, camera interaction, and digital art lighting control.

3. MadMapper Control

Suitable for LED pixel mapping, spatial lighting design, and creative art installations.

4. Resolume control

By using a compatible Art-Net/DMX output workflow, the show’s visual content can be synchronized with LED pixel lighting.

5. MA Lighting console integration

It can be integrated with Art-Net/DMX systems and professional lighting consoles to synchronize lighting shows with pixel animations.

6. Universe Capacity

RGB mode occupies 3 logical channels per pixel.

24 RGB pixels per meter, occupying 72 channels.

A single 3-meter LED tube has 72 RGB pixels, occupying 216 channels.

A single DMX universe contains 512 channels, theoretically capable of accommodating 170 full RGB pixels.

The actual universe allocation, controller port capacity, and signal cascading method shall be confirmed based on the control system configuration.

6. System connection method

1. Art-Net SPI online control

MADRIX computer → Art-Net network → AOSHOW SPI controller → AS-D40 RGB pixel light strip

2. TouchDesigner interaction control

TouchDesigner → Art-Net network → SPI-compatible controller → AS-D40 RGB pixel light strip

3. PSAC intelligent control box

Professional lighting software → Art-Net network → PSAC smart control box compatible with DC 24V → AS-D40 RGB pixel light tube

4. AS-832M Distributed Control System

Professional lighting software → Art-Net network → AS-832M compatible splitter controller → Multiple sets of AS-D40 pixel light tubes

5. SD card offline control

AS-SDMX master controller → Compatible with AS-832M slave controller → AS-D40 RGB pixel light strip

The actual connection method should be determined based on the driver IC, controller output mode, voltage, power, and port capacity.

7. Installation and connection features

1. 3-pin connector design

It uses a 3-pin connector cable, making it easy to connect the LED strip to compatible SPI controllers and associated wiring.

Before use, be sure to verify the definitions of the power positive, ground, and data signal pins to avoid wiring errors.

2. Modular installation

Supports six different length configurations, making it ideal for stage setups, commercial exhibitions, and art installation projects.

3. A variety of fixed way

Bracket fixing, professional hoisting or customized installation structure can be adopted according to project requirements.

When hoisting, an independent load-bearing structure should be used, and the weight of the lamp body should not be borne by the power line or signal line.

4. Long distance connection

SPI signal cascading can be implemented when the controller capacity and signal conditions permit.

For connection lengths of 12 to 15 meters, the design should be based on the actual cable, power supply, connectors, and line voltage drop.

Do not interpret 12 to 15 meters directly as the single-ended continuous power supply distance without the need for recharging.

5. Black and white appearance

You can choose between a black or white PC lampshade to match the visual style of stages, bars, commercial showrooms, and digital art projects.

6. Maintenance and Replacement

The modular design facilitates lamp inspection, maintenance and replacement.

Disconnect the power supply before performing maintenance operations.

8. typical application scenarios

1. Stage and Concert

Suitable for concerts, music festivals, DJ performances, stage backgrounds, lighting arrays and hanging art lighting installations.

Through the RGB pixel control to achieve dynamic water, chase, strobe and music synchronization effect.

2. Bars, nightclubs and KTV

Suitable for bar ceiling, DJ stage, wall decoration and immersive entertainment space.

The black lampshade is suitable for dark field environment, and the white lampshade can provide different spatial visual performance.

3. 3D stereo pixel matrix

A plurality of lamps can be combined according to the XYZ spatial structure to realize a three-dimensional light and shadow matrix and a geometric art installation.

When combined with TouchDesigner or MADRIX, it can create dynamic spatial light waves, pixel particles, and custom 3D visual effects.

4. Creative architectural lighting

Applicable to architectural art lines, indoor and outdoor decoration, commercial facade and creative lighting structure.

For outdoor projects, the IP66 version that meets the installation requirements shall be selected.

5. Immersive Interactive Art

It can be combined with cameras, sensors, and TouchDesigner to create digital lighting installations driven by music, human movement, and real-time data.

6. Commercial display and brand activities

Applicable to the mall atrium, brand exhibition hall, product launch, digital display and creative business space.

7. Cultural Travel Night Tour and Digital Art

It is suitable for art pavilions, theme light and shadow exhibitions, cultural tourism projects and large creative installations to create a dynamic RGB three-dimensional light and shadow experience.

9. Installation and power supply precautions

The product is powered by DC24V, and direct access to AC mains is prohibited.

The rated power per meter is 32W, and the load shall be calculated according to the actual lamp length.

A single 3 m lamp tube has a rated power of 96W and a theoretical current of 4A.

When multiple fluorescent lamps are connected, the power supply and wiring should be configured according to the actual load.

12 to 15 meters continuous connection shall verify the signal cascade capacity, line voltage drop and power supply requirements.

Verify that the SPI controller is compatible with the UCS1903 driver chip.

Before connecting, verify the voltage, grounding, and signal pin assignments of the 3-pin connector.

When installing the IP66-rated version, ensure that the connectors, end caps, and wiring areas are fully sealed.

Non-flexible tubes shall not be bent, stretched or twisted by force.

For large-scale hoisting, check the bearing capacity of the structure and configure safety fixing measures.

Before installation and maintenance, the power supply must be disconnected.

The actual maximum cascade distance and stable working capacity shall be subject to the engineering test.

10. OEM/ODM product customization services

AOSHOW offers customization services for the AS-D40 LED full-color pixel light tube and its accompanying control system.

Customizable Content:

Lamp length: 0.5m / 1m / 1.5m / 2m / 2.5m / 3m

Lampshade color: black/white

Number of LEDs and pixel density

Double-sided LED light-emitting structure

RGB Digital Pixel Driving Scheme

IP20/IP66 protection configuration

Cable and Connector Specifications

Art-Net/SPI Intelligent Control System

PSAC Control Box Matching

MADRIX pixel mapping scheme

TouchDesigner Interactive Lighting Scheme

3D stereoscopic matrix lighting system

Supporting works of stage, bar, architecture and art installation

The specific scope of customization is subject to product structure, technical feasibility and order requirements.

XI. AOSHOW Brand Introduction

Shenzhen AOSHOW Photoelectric Technology Co., Ltd. (AOSHOW) was founded in 2016, located in Shenzhen, China, is a focus on creative LED lighting, digital pixel lighting and intelligent control system research and development, production and engineering applications of the source manufacturers.

The company's main 3D solid matrix lamp, 360 ° LED pixel tube, LED full color pixel light bar, flexible neon tube, digital point light source, Art-Net SPI controller and PSAC intelligent control box.

Products are widely used in stage, bar nightclub, KTV, architectural lighting, cultural travel night tour, commercial space and immersive digital art installation.

AOSHOW is dedicated to integrating digital pixel technology, professional lighting control, and creative design, providing global lighting designers, contractors, system integrators, and digital art creators with professional LED lighting products and customized solutions.

Brand concept: light and shadow as the media, quality as the basis

Product proposition: 360° omnidirectional illumination, enabling every pixel to unlock greater possibilities.

Official website:https://www.aoshowai.com/

XII. Product Selection and Engineering Recommendations

1. Select the model based on the installation length.

Available in six specifications ranging from 0.5 to 3 meters, allowing selection based on project height and spatial layout.

2. Select the model based on the lampshade color.

Black lampshades are suitable for dark-stage settings and bar spaces.

White lampshades are suitable for commercial displays and settings that require soft, diffused lighting.

3. Select based on the protection rating.

The IP20 version is suitable for indoor dry environments.

The IP66-rated version is suitable for indoor and outdoor applications that meet the specified protection requirements.

4. Based on the control system selection

The standard RGB version uses UCS1903 digital drivers and should be paired with a compatible SPI pixel controller.

5. Select the model based on power supply conditions.

It uses a DC 24V power supply and consumes 32W per meter.

For large-scale projects, power supply should be planned based on the total power consumption, line voltage drop, and the rated current of the connectors.

6. Select based on the desired artistic effect.

24 pixels/m is ideal for stereoscopic light waves, pixel chases, RGB gradients, and spatial digital art animations.

7. Select the model based on customized engineering requirements.

Supports customization of tube length, lampshade color, pixel configuration, mounting structure, and control system.